20 Most Recent
Timex Ironman 30 Lap 53952 Wrist Watch - Page 2 Questions & Answers
Timex Ironman 100 - New battery, stopped beeping
Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.
Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!
If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question
NEW BATTERY. NO CHIME OR BEEPS ON THE HOUR,TIMMER, AND ALARM
could be following reason
1, you did not put case back correctly,
2, small spring which connect watch movement from caseback for chime lost during battery change ,
3, may be required reset of AC & Battery plus ,, by twizer
hope this help
From:
AmFix
Jewelry & Watch Repair
203 N. LaSalle st
Chicago, IL 60601
Ph: 312 641 7000
email:
[email protected]web:
www.goamfix.com
I have a timex ironman
There are two ways to find the user manual for your Timex watch.
- Find your watch on the list below and click on the language link for your manual.
- Find the 3-digit module number located on the caseback of most Timex products and click on the corresponding language link for that number in the Module Table.
If you are still unable to locate your user manual, you may email Timex Customer Service or call us toll-free at 1-800-448-4639.
http://www.timex.com/info/Product_Instruction_Guides_Downloads
My Ironman has EE:EE on the display, The Chrono
I doubt if your watch is faulty. If you read your instructions I would expect you to be able to empty the memory.
You can get instructions from the Timex web site "timex.com".
At the bottom of the screen click on "manuals/downloads", then on "product
manual download"
Enter your watch type in the search box and click on "search"
I replaced the battery. was told it needed to be
Remove and reinsert battery.If no result,proceed as follows:
Use a watch tweezer with sharp endings.Remove watch back cover.You will see somewhere on the watch chassis "AC" engraved.There is a hole with contact at the bottom next to "AC".Gently,put one leg of the tweezer touching this contact and the other leg touching the chassis,instantly.Check the display.If no result,try again.This short-circuit/ground will activated the internal circuit and the watch will start working.If you do not have tweezer,you can use 2 watch repairer screw drivers,as well.
There is no display on the watch at all, like the
mcdevito75 here, Sorry, but a watch battery that is less than 1 year old can still be weak or dead, You have to try a new battery first. Battery could have gotton loose, or have dirty contacts. Look for a small watch repair shop in your area. It"s possible you shut the watch off also, Press and hold the MODE button 2-3 seconds see if the display comes back.
Pins keep popping out when watch band gets
mcdevito75 here, These pins may be a bit worn in the band of your watch, if so, you"d have to order a kit with various size pins for replacement. BEST BET, look for a small watch repair shop to fit new pins in the band.
How to set the time
mcdevito75 here, In most cases you"d press MODE and see the display blinking, then press set to change each function, pessing MODE again after each function change to move onto the next, When all functions are set press MODE again for a steady display.
Adjust band
mcdevito75 here, You"d need a tool called a Link reover to remove the links, available on ebay, however by the time you order the tool, recieve it, etc. The cost will be about the same if you look for a small watch repair shop in your area, have them remove the links. Hold onto these links in case ypou want them re--installed.
Not finding what you are looking for?