20 Most Recent eMachines eM250-1915 Netbook - Page 5 Questions & Answers

Press Fn + F7 to enable touchpad

Try reinstalling video drivers http://driverscollection.com/?file_cid=426109555742c95f9e6838c1298

better take it to laptop service centre as many drivers need to be install in the process

First try to use the card to any other machine, see if the card is defective. Then try you card reader with another card, if you found the same result then probably your card reader has some issue. You either repair it form nearby service center or use a external card reader.

You do not use the serial number to your laptop. You need the serial number for the software. It should be on the disc it or the box the software came in.

This blue screen is commonly referred to as a BSOD - Blue Screen of Death. Unfortunately, if your computer is looping a BSOD your options are greatly limited and you will most likely need to do a complete wipe of your computer and start over. Getting your data before this happens though should still be possible! Assuming you've a flash drive or external drive with the necessary space, you'll need to boot your computer into Safe Mode. I'd say there's a decent chance you'll be able to get into Safe Mode without a BSOD just so you can get your files. Note that a lot of things will be disabled in Safe Mode, so chances are you won't be able to do your work in it. To do this, turn your computer off and then back on. Right as your computer turns on, hold down the F8 key. Since every computer is different it's difficult for me to describe what you'll see, but if you see anything related to Safe Mode, you want to select that.
Good luck!

Ouch, it sounds like your laptop cannot recognize your operating system. When a computer boots up it looks for an operating system (such as windows) on differnet devices. For example: 1. hard drive, 2. dvd drive, 3. network card. You may have a dead latptop and need to reinstall the operating system.

booting problem check the boot order in your system bios and change the priority and check

keep hold of FN, bottom of keyboard, just left of your spacebar,, Then press F8 or associated wireless button on your system. Press both buttons together and release together. If no luck it may be your wireless driver needs updating. Try FN first and let me know if that works. If not log onto emachines website http://support.gateway.com/us/en/emac/product/default.aspx?tab=2 and select your appropiate netbook. After selecting your product, browse through the list of drivers, until you find the appropiate wireless driver. Download and install.

Option 2 is to click on start and type driver in the search bar. At the top of the list you should have update device drivers. Click that and then double click network adaptors, right click listed drivers one at a time and select update driver for each listed.

Hope this helps and please rate,,,

This works with most computer that come with a "restore" partiton, and haven't been erased.

when you turn on your computer look for the bios screen(press this for setup, this for boot) imeadiatly look for text that say "restore" and a key to press, then press it, you might need to do it a few times, it's usually a second or 2 before windows boots.

I would think it is quite likely to be an exhausted battery. They leak as they get nearer full charge and in time will fail completely.
Hope this explains it for you.

HELLO,
GO TO INSTALLATION FOLDER OF WEBCAM DEVICE,LOCATE THE DEVICE ICON THEN RIGHT CLICK..THEN SCROLL DOWN AND CLICK SEND TO>THEN SELECT DESKTOP.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Goodluck,,

Hi

can you have a look here
go to and click on
start
computer

and in there you should see the webcam hopefully
click on it and it should start

also if you find it you could copy the icom and paste it to your desktop for easy access

click start, then control panel, then you can see the camera icon there click it

Hi

You could try pressing F10 at start up this may take you to the recovery

some are F11 Some are F12

try this site
http://drp.su/drivers/notebooks/?v=eMachines&m=eMachines%20E727&id=376&l=en
hope it helps

Select the model of your notebook and download driver form there...

http://www.emachines.com/support/product_support.html

one of his start up drivers is eather missing or failing to start up restart your computer push f2 then go to the boot log with your arrow keys change the off of f2 to f12 then f10 to save then restart push f12 then run windows under your first option then push enter a sec page will come up do you want to run windows go there then push enter so ok if windows want comeup this way you will have to get windows disc because his start up driver is missing.

Hi there, please follow the steps.
Hi there follow the instruction below.


1**. Double click my computer then double click USB Video Device.
You can see your self then. If the USB Video Device not showing
there then you have to install the cam first.


2. Power On the laptop/PC & after ready your OS for work just put
your Webcam driver disk in DVD/CD RW/ROM. when its open, that
time just select webcam driver and install it as per your operating
system(Vista or XP). So do it, and after finish installation ,restart the
laptop. Your will see your cam is ready for use.
Then follow again the first instruction.**


3. When you confirm after viewing your self in cam , then stop it. Now login on messenger & click to connect the cam from messenger. If any doubt then then ask me a again. Thanks & waiting for your feed back.


Thanks & waiting for your feedback.

Right click in an open area on the desktop and choose PROPERTIES >DESKTOP