20 Most Recent MSI Wind Top AE222027SUS PC Desktop - Page 9 Questions & Answers

It might be overheating. When your PC shuts downs and it's hot to the touch in some areas you might want to try this: I would buy a bottle of compressed air and I would clean/blow out the fans and exhaust port/s.

This will depend on the Operating system in use but 2x 4Gb will function even on an older 32bit XP system, so it will be fine to install that if you wish.

Now remember, the G2 main board cable has 2 connections on one end, and one on the other. You have to make sure both are connected. This is a common issue. If this doesn't work, check to make sure that all your cards are properly seated. EVGA Products EVGA SuperNOVA 750 G2 Power Supply 220 G2 0750 XR

try to boot the computer, if you hear the start up sound then mobo is not bad. this issue could be caused due to boot sector viruses as well. see if the back light turns on .. check the settings in bios and try to run a recovery. if neither helps call 1-877-805-1027 for expert help

MSI is not very good on their older cards. The default Microsoft drivers in Win7 and Win8 are the first place to go if the MSI website does not have the driver for an MSI card. Look for the driver using Google, not MSI. OS upgrades are cheap, the only problem with Win8.1 is that you have to use the 32 bit version on many older PCs.

The adaptor may be faulty if it not receiving any power at all or if there are led notifications when trying to power it on, it may have a motherboard or lcd problem.

Using chrome, just go to the 3 bars top right corner, then delete browsing history, you can also clear cookies from there as well.

Go to MSI's website and download the drivers.

You must post your system specs, so I can answer this question.

Use a cell phone or other computer to grab the drivers from the website, then connect phone to computer and install drivers from there.

You must post your system specs in order for anyone to answer that question.

Try updating the drivers to the latest version, that should fix any problems.

http://www.msi.com/product/mb/760GM-P34--FX-.htmlhttp://www.msi.com/product/mb/760GM-P34--FX-.html#/?div=ManualUnder the Download subheading click on the blue -M7641v4.0.zipClick on the 'country' name nearest yours.(U.S. is a country, the others Europe and Asia are continents)A small window will come up -Opening M7641v4.0.zipMake SURE there is a Green dot in the small circle, to the left of Save File.IF not; click in the small empty circle to the left of Save File.Go below in the window, and click on - OK.A small download window will come up.Allow the file to download all the way, then DOUBLE-click right on the file name. (Yellow folder icon with zipper on it, and M7641v4.0.zip next to it)In the next small window go to the far left, and click on - Extract all files.At the bottom of the next 3 small windows, click on Next, Next, and Finish.In the last small window DOUBLE-click right on the file name -7641v4.0(G52-76411X9)(760GM-P34_760GM-P24_760GM-P2...)There is your motherboard manual in PDF file form.(Zip file.A Zip file is used to send large amounts of information more easily.It is a Compressed file.You need to 'unzip' it, or decompress it )(Adobe Reader uses PDF files)The Adobe Reader page number box is at the Top, to the right of the Down Arrow.When I refer to a page it is for that page number box.Clicking on the Zoom In icon at the Top ( + ) Increases the view size.Clicking on the Zoom Out icon ( - ) Decreases the view size.The front of your computer is the Front Panel.The area of contact pins on the motherboard, that the Main wires go to, is the Front Panel header.Example; Front Panel header pinout:The Front Panel header is two headers on this motherboard.Go to Page 11.Here at the Bottom/Right of the motherboard you see the 6 SATA connectors; all of them Black in color.To the immediate Left of them, and situated Horizontally; is JFP2.Junction Front Panel 2.Two rows of pins.To the immediate left of JFP2 is JFP1.It is also situated Horizontally.Two rows of pins.JFP1 has two rows of contact pins. 4 across the Top, 5 across the Bottom.The Top row is numbered EVEN. The Bottom row is numbered ODD.Starting on the LEFT side, going towards the Right, Top row;Pins 2, 4, 6, and 8. There is NO Pin 10.Starting on the LEFT side, going towards the Right, Bottom row;Pins 1, 3, 5, 7, and 9.A) Pins 1 and 3 are for the HarDDrive activity LED light.Pin 1 is for the Positive wire.If the HDD LED is dim when the Harddrive is active, switch the wires around.B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.C) Pin 9 is N/C. Not Connected. This is reserved for the factory. Probably a 5 Volt (DC) test point.D) Pins 2 and 4 are for a Power On LED light, and TWO wire.Pin 2 is for the Positive ( + ) wire.If the PWR LED is dim when the computer is on, switch the wires around.E) Pins 6 and 8 are for the Power On switch.F) There is NO Pin 10.Junction Front Panel 2. (JFP2)The Top row has 4 pins, and they are numbered EVEN.The Bottom row has 3 pins, and they are numbered ODD.Starting on the LEFT side, going towards the Right, Top row;Pins 2, 4, 6, and 8.Starting on the LEFT side, going towards the Right, Bottom row;Pins 1, 3, and 5. There is NO Pin 7.A) Pins 1, 3, and 5 are for a THREE wire Power ON LED light.This type of LED light is a dual color LED.In the past, and one example; it may have been used for computers that had Turbo Mode, and Normal Mode.Turbo being Green, Normal being Yellow.(Which was a bunch of hooey.Turbo Mode was the Normal mode, and Normal Mode was a slowed down version)Pin 1 is for the Negative ( - ) wire. Also can be said as the Ground wire.Pins 2 and 3 are for the power wires, (Positive + ), and each color.(Example: Pin 2 for the Yellow side of the dual color LED, and Pin 3 for the Green side of the LED.Light Emitting Diode. So stating LED -> light is kind of redundant)B) Pins 2, 4, 6, and 8 are for an internal speaker.Used to hear BIOS Beep Codes.If there is something you do not understand, that you need for connecting cables, and peripherals; post back in a Comment.(A Harddrive, and Optical Drive, are also Peripherals. Not just the Mouse, Keyboard, Printer, Monitor, etc)Regards,joecoolvette

Go to "Support & Service location" and select your product.

Heatsinks are dependent on the type of processor that you have, I recommend that you call Microcenter or fry electronic

http://www.pcityourself.com/building/frontPanelConnections.php FRONT PANEL CONNECTIONS. THIS IS IN GENERAL. ARE THIS WHAT YOU MEAN.

MSI seems to have to incompatible numbering systems. 7543 doesn't come up on a search of their site. Are there any other names or model numbers on your motherboard? If so, I can get the link to the manual for you.

MSI USA Computer Laptop Notebook Desktop Mainboard Graphics and more

REA THE MANUAL.