20 Most Recent Lexmark Prevail Pro705 Wireless All-In-One InkJet Printer - Page 4 Questions & Answers

Copy of the user manual can be downloaded from this link, just click HERE.

This could be a hardware issue. Please contact Lexmark Technical Support Center to further troubleshoot and fix this problem quickly.

Lexmark recognizes that some of our inkjet all-in-one customers may be experiencing issues with their print quality. We take our customer user experience very seriously, and we strive to ensure that each time a customer prints using a Lexmark device the page is crisp, clear and up to the highest standards.

However, if your device is displaying a 'printhead error' on the hardware and/or you are suddenly experiencing a print quality issue, please contact the Lexmark Technical Support Center at 1-800-539-6275 or point your browser to http://bit.ly/lFKDzs for online technical assistance.

Lexmark agents are prepared and able to help diagnose and resolve your issue. This may involve updating your printer firmware and/or replacing the printhead for your printer, at no charge to you, our customer. Installation is quick and easy for any customer to perform.

Lexmark recognizes that some of our inkjet all-in-one customers may be experiencing issues with their print quality. We take our customer user experience very seriously, and we strive to ensure that each time a customer prints using a Lexmark device the page is crisp, clear and up to the highest standards.

However, if your device is displaying a 'printhead error' on the hardware and/or you are suddenly experiencing a print quality issue, please contact the Lexmark Technical Support Center at 1-800-539-6275 or point your browser to http://bit.ly/lFKDzs for online technical assistance.

Lexmark agents are prepared and able to help diagnose and resolve your issue. This may involve updating your printer firmware and/or replacing the printhead for your printer, at no charge to you, our customer. Installation is quick and easy for any customer to perform.

Your satisfaction with your Lexmark devices is our primary concern, and we are confident and committed to quickly correcting these issues.

Please visit the Lexmark website to download the Lexmark Pro705 User's Guide for free.

It could be mechanical problem in the printer. Please contact Lexmark Technical Support Center for assistance.

Lexmark recognizes that some of our inkjet all-in-one customers may be experiencing issues with their print quality. We take our customer user experience very seriously, and we strive to ensure that each time a customer prints using a Lexmark device the page is crisp, clear and up to the highest standards.

However, if your device is displaying a 'printhead error' on the hardware and/or you are suddenly experiencing a print quality issue, please contact the Lexmark Technical Support Center at 1-800-539-6275 or point your browser to http://bit.ly/lFKDzs for online technical assistance.

Lexmark agents are prepared and able to help diagnose and resolve your issue. This may involve updating your printer firmware and/or replacing the printhead for your printer, at no charge to you, our customer. Installation is quick and easy for any customer to perform.

Your satisfaction with your Lexmark devices is our primary concern, and we are confident and committed to quickly correcting these issues.

Lexmark recognizes that some of our inkjet all-in-one customers may be experiencing issues with their print quality. We take our customer user experience very seriously, and we strive to ensure that each time a customer prints using a Lexmark device the page is crisp, clear and up to the highest standards.

However, if your device is displaying a 'printhead error' on the hardware and/or you are suddenly experiencing a print quality issue, please contact the Lexmark Technical Support Center at 1-800-539-6275 or point your browser to http://bit.ly/lFKDzs for online technical assistance.

What you are experiencing could be due to a faulty printhead. Lexmark recognizes that some of our inkjet all-in-one customers may be experiencing issues with their print quality. We take our customer user experience very seriously, and we strive to ensure that each time a customer prints using a Lexmark device the page is crisp, clear and up to the highest standards.

However, if your device is displaying a 'printhead error' on the hardware and/or you are suddenly experiencing a print quality issue, please contact the Lexmark Technical Support Center at 1-800-539-6275.

Lexmark agents are prepared and able to help diagnose and resolve your issue. This may involve updating your printer firmware and/or replacing the printhead for your printer, at no charge to you, our customer. Installation is quick and easy for any customer to perform.

Try updating the firmware of your printer. Just go to www.lexmarklabs.com/firmware and choose the model number of your printer.

After applying the firmware update, try to do a "Deep Clean Printhead". To do that, on the control panel of your printer, press on Setup (Wrench button) > Maintenance > Deep Clean Printhead.

If the problem persist, please go to this link for more info: http://bit.ly/mDKqh7

Updating the firmware for your Lexmark Pro200 series will help fix this problem. You will need to get rid of the error first before you can successfully update your printer. Follow these steps: 1. Open the cover of the printer > Remove the printhead. If the printhead will not go to the center, turn off the printer and pull the printhead to the center. 2. Once you have the printhead removed, close the cover of the printer and turn on the printer. 3. It will ask you to "Open Cover to Install the Printhead". Press the Cancel (Red X) button. 4. It should take you back to the "Copy" menu. 5. Proceed with the firmware update. Just go to http://bit.ly/p205fw. There'll be more than one download for your model, try the top download first. 6. Once the firmware update is successful, reinsert the printhead by following the steps on your printer screen.
Source: There is a Problem with the Printhead

Make sure your printer is updated. The firmware update, available in the Lexmark website, will help fix printhead-related problems. Follow these steps: 1. Remove the printhead from the printer.

2. Reset the printer by unplugging the power adapter from the printer (should be the whole black box on the back of the printer), leave it unplugged for about a minute then plug it back in.
3. Once the printer is back on, it will ask for the printhead. Just disregard the message by pressing or CANCEL button on your printer screen. Do not install the printhead yet.
4. Then, please use this link: http://bit.ly/p705fw to download and run the firmware on your computer. Please make sure that the USB cable is attached from the printer to the computer while you do this.
5. Once the firmware update is complete, you may reinstall the printhead.

tokkummaa

Try to remove the sheets of paper from your printer. Unplug and re-plug your printer into the power source to reset it. When the printer turns on, load some paper but don't overload. Try to print again. If error continues, please contact Lexmark technical support for additional assistance.

get your software/drivers from here

You'll need to reconnect your printer to your new wireless network. Here's how:

1. Click on Start > All Programs > Lexmark > Printer Home.
2. Click on Settings > Wireless Setup Utility.
3. Follow the steps.

Once you already have the printer connected to your network, you'll need to update the port settings on your computer. Here are the steps:

1. Under control panel, go to Printers and Faxes.
2. Right click on your Lexmark icon and go to properties.
3. Click on the Ports tab.
4. Highlight the Pro700 Series port.
5. Click on Configure port (it will search for all available printers on your network)
6. Highlight your Lexmark Pro700 Series printer.
7. Click on Close then click on OK.

You should be able to print now. If not, please click on the link for more info: http://bit.ly/lJzrw5

Make sure that you're using Genuine Lexmark Cartridges. If you are, try updating the firmware of your printer. Just go to www.lexmarklabs.com/firmware and choose the model number of your printer.After updating the firmware, try cleaning the printhead. To do that, press on the Setup button (Wrench) > Maintenance > Deep Clean Printhead.If you still have the same problem, please click on the link for more info: http://bit.ly/mDKqh7

Try to download the software online at www.lexmark.com. Just click on the link to take you directly to the download page: Lexmark Z705FYI: that printer is not compatible with Windows Vista or 7. For Mac, it's only compatible up to OS 10.4.x.

Try using the Lexmark Printer Home when scanning. If you have a PC, to access it click on Start > All Programs > Lexmark > Printer Home. You can scan to a .jpeg, PDF or .doc.

If you're scanning from the control panel of your printer and you're getting an error message, "Cannot Retrieve Application List", most probably your firewall is blocking your printer from downloading the applications. You might want to add the Lexmark files in the exception of your firewall. Click on the link on how to add exceptions to your firewall.

If you're trying to scan to email (email client), try to check this link: http://bit.ly/k0w0Hp

Try to uninstall the driver for your Lexmark printer. After uninstalling the driver, follow the steps below:

1. Go to Devices and Printers.
   
2. Click on any Printer or Fax icon.
   
3. Click on Server Properties (below the Address bar).
4. Click on the Drivers tab.
5. Delete the Lexmark drivers.
6. Download an updated driver online at www.lexmark.com. Make sure to choose the right driver for your computer (Win 7 32bit or 64bit).