20 Most Recent
Infinity Reference 7541a Car Audio Amplifier - Page 4 Questions & Answers
Only one out of 4
Yes, and also check the wiring to your speakers and ensure that there are no bad wires. Generally the front and rear inputs are designed for more advanced receivers. If you have one that support front and rear inputs, then yes you should be using them,if not then don't worry about it.
I just bought a 2010
Hi, your car requires a special adapter for installing an aftermarket stereo. The adapter comes with all the wiring harness you will need, and will greatly simplify the process. You can get details on the adapter from Crutchfield, but they are a bit pricey for purchase. I would look over their website and then shop around for the adapter.
The adapter is here:
http://www.crutchfield.com/p_127C2RCHY4/PAC-Chrysler-Radio-Replacement-Interface.html
To see more about installing the new head unit, I recommend you go thru their "outfit my car" process of putting in your car's info. It has specifically identified the case of the infinity system. Click the following link and enter the info for your car, then there is another link that will show you all of the things you should consider before doing the installation:
http://www.crutchfield.com/App/Car/outfitmycar/MyCar.aspx
Please let me know if you have more questions, and thanks for using FixYa.
When power gets put to
Check the impedance of the speaker set up. Reasons for going in to protection mode is that amp can't handle the impedance... Just incase you don't know what impedance means, it is another way of saying ohms!
Error code: r-sp
Hi, from what device is the error code: r-sp coming from. What is the name and model of the device.
Take care
All wires are hooked up but no lights come on, is
Hi Wex,
Wires being hooked up is fine. With no lights coming on the question becomes one of power.
Ground needs to be grounded.
+12VDC should have +12VDC
Remote should also have +12VDC when the stereo is on.
Check these with a volt meter. Negative lead on the ground terminal, Positive on +12V then Remote.
Both combinations should read +12VDC.
Next check the fuses if any that your amp has. Make sure they aren't blown.
Comment back if this doesn't point you in the right direction.
Mike
I replace the infinity car audio system in a
I didn't solve the problem but do I understand correctly your e-mail: if I don't go with your free plan...I can't have my answer? I have to subscribe to something to know the answer?
I have an Infinity 530a 5 channel amp. new
May be the problem is on the sound you are using is not a 5 channel coded sound or check in the menu´s of the amp if the rear channel´s have sufficient db output, check the connections, check if you amp. is not working only as simple stereo (menus also)
Hope this helps
Help with code radio for my nissan pp2787h
The radio code is a security feature that's meant to deter theft, and it's unique to each vehicle. If you've lost your code, you'll need to contact a Nissan dealership or service center and provide proof of ownership. They should be able to help you retrieve the code. Please do not attempt to use codes from the internet as incorrect attempts may lock your radio.
Not finding what you are looking for?