Asrock P4I45E-R3 P4 845E FSB800 DDR400 Motherboard (MOTASR15) - Answered Questions & Fixed issues

Here you go.... http://www.asrock.com/mb/Intel/P4i45E%20R3.0/?cat=Download

http://europe.asrock.com/MB/overview.asp?cat=Manual&Model=P4i45E%20R3.0

http://www.asrock.com/mb/Intel/P4i45E%20R3.0/?cat=Download&os=All FIND THIS.

http://www.innovative-sol.com/drivermax/TRY THIS SITE.

if your computer came with a motherboard disc the sound drivers could be on it click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers if you dont have a motherboard disc you will have to download the drivers cnetdownload.com if these drivers are not suitable on the home page you should see the download software finder under that there will be a list platform, category sub category price fromthe category drop down list select drivers then from the price drop down list select free or which ever applies to your need or you could try some of these http://download.cnet.com/Realtek-AC-97-Driver-Windows-98-Me-2000-XP-2003/3000-2120_4-10238712.html Realtek AC

hi guys have a good day hmmm i just wanna ask you... if you dnt mind.. how can i download Asrock fsb800 prescott 800 motherboard driver setup??

laptop or desktop computer ?Test your PSU power supply unit or replace it if your power supply units fan is not working your PSU is faulty

http://pcsupport.about.com/od/toolsofthetrade/f/powersupplytest.htm

One bad lead can cause a computer to continue on a cycle of restarting or to shutdown or fail to detect/ boot up a computer hard drive

Test all leads that attach to your hard drive power and data cables IDE SATA

the leads from your MOTHERBOARD TO YOUR HARD DRIVE make sure they have a secure dust free connections and are not faulty or just replace them they could be faulty make sure all leads that are attached to your dvd\cd floppy drives have secure connections and are not faulty or just replace them they could be faulty computers need power and data to travel through every working device to continue its cycle and have an end so any faulty leads will end up with a computer error even something as small as a faulty electrical or fan lead can cause you problems

motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail

check all electrical power input and extensions make sure they are securely seated even the cd/dvd floppy drives need to have current go through make sure these drives are working

also check the Cmos battery and computer RAM modules make sure they are securely seated with no dust built up or in the sockets on some motherboards cmos batteries are soldered in check you CPU central processing unit make sure its securely seated and has thermal paste it might be getting to hot the thermal paste will help disperse the heat Thermal compound is a sticky paste that is placed directly onto the CPU. Allowing for a more direct heat transfer between the CPU and HEAT SINK and preventing air gaps from forming between the CPU and heat sink. hope this helps

Computer does not boot up The problem maybe the RAM, it is faulty or just needs reseating to make proper electrical contact. Reseat the RAM and then boot up your laptop. If it still does not boot up then remove the RAM module/s and take them to your friendly computer repair shop and get them to test the RAM for you. Just like you sometimes need a mechanic to repair your car, sometimes you do need a technician to diagnose and identify the fault or faults on your computer. Not only does a good service technican have the experience to deal with this type of problem, they also have the equipment that allows them to look at things the average computer user can't see, and he has a collection of replacement parts that can be used to quickly test individual components on your computer.

Hi, i am not clear about your problem, but i guess installing chipset driver can fix your problem. You can get it to the Asrock websites just look for the same model.

Hope it helps a bit.

Regards,
toeped

Why not u can install Windows 7 , but the problem may arise in installing video and audio n drivers .Don`t worry ,After installing Win 7 put the mother board CD in CD Rom and go to Device Manager and if u see any devices as warning(Unknown) ,select right click and go to " Update driver and show the path of CD Rom. it will detect the drivers from CD if not have to try with other alternative.The above will work sure.Mine is too P4 working with Windows 7

if your computer came with a motherboard disc the sound drivers could be on it click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers or uninstall click start control panel sounds and audio,volume,advanced,speakers make sure you have selected the (((appropriate speakers))) also audio you will find 3 drop down lists make sure you have the correct settings there also click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it if you mean that you deleted some sort of sound device on your computer click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar if his does not fix the problem

have you tried this control panel sounds and audio,volume,advanced,speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand,system speaker right click properties then select use this device (enable) also you might check the speakers plug/outlet is usually at the back of the computer you will have to open up the computer to check the lead attached to the rear of the input plug make sure the connection is good try cleaning your computer of dust using a fine air blower from a compressor making VERY sure that there is no MOISTURE in the air line specifically around the sound card and the CPU central processing unit dust causes static to build up in a computer hope this helps

if you need the driver for this mother board you can check the website of asrock this is the link http://www.asrock.com/support/download.asp just type the model name and type of device you need.

ITALIANO

Sceda madre ASROCK Prescott 800, FSB 800/DDR400 Dual Channel

Comme deve ataca PANEL1

POWER SW o o
RESET SW o o
HDD LED o o
POWER LED o o o

Grazie

Download the audio driver from here: ftp://174.142.97.10/drivers/Intel/Audio/C-MEDIA_XP_2K_ME_98(UDA041_build04L).zip

Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to continue on a cycle or to shutdown

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your motherboard to your hard drive make sure they have a secure connection and are not faulty or just replace them there probably old and faulty
problems
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty or just replace them they be bad/faulty ?

here ya go!

http://europe.asrock.com/downloadsite/drivers/Intel/Audio/C-MEDIA_XP_2K_ME_98(UDA041_build04L).zip

hope this helps!

You need to goto the manufacturers website, find their support section and there should be a list of drivers for your specific machine. Installing these should resolve your problem. I have a list of links to most manufacturers drivers on my website.
Hope this helps,
www.PuterCare.com

you got reinstall windows,, your boot file are ccorrupted, because of virus,,, ensure that, after reloading windows,, install an anti virus program, and update it, from internet.

hi thanx for trying fixya

here is the link type you model number of the motherboard, in the search then download the drivers

http://www.asrock.com

real asrock mobo told ,just the intel chipset code H110the bios controls that in bios disable iGPU. no cpu told either as some have no igpu at all.like xeons, and some mobo can run both i3+ and zeons.see this search at asrocksee how your post has no real clues?https://www.asrock.com/support/index.asp?Model=h11029 mobo made based on only intel chipet.