20 Most Recent
Canon PowerShot SD1400 IS IXUS 130 Digital Camera - Page 11 Questions & Answers
Format feature does not light up
Check your shooting mode. Some features are available for a given mode only. If you set your camera to a pre-programmed mode, many features will be greyed - not available.
Set the date and time on sx700canon
- Go to the camera menu, scroll through to "Date/Time"
- Press the left/right arrows to choose an option field (month/day/hour/minute)
- Adjust that setting by pressing the up/down arrows or using the dial
- Select SET/OK when done
Instructions are located on page 147 of the user's manual. You can download a PDF version of the manual from Canon's website.
Canon sx210is wont power on
Battery contacts could be insulated with light grease from hands etc. Try using a small throwaway nail file to gently clean the contacts on the camera.
Canon camera will not turn on.
Most often when this happens, it is, as you\'ve stated, a battery, but it might also be a corroded battery connection. You can use an eraser, or if its physically obvious, try a tiny piece of fine sandpaper, but use it gently, only to clean off corrosion. It may also be that your camera was dropped and a soldered circuit connection damaged, or it might have been exposed to penetration of moisture. The best thing you can do is 1. Give it time, say a month, to dry out, and 2. Send it in for an examination by Canon, being sure you tell them you\'ll need a repair estimate to ensure it is cost effective. Most often with a hand-held point-and-shoot it is not. Will it start up when you connect to your computer?
Sars all forms
Good. Excellent question. Yes is the answer. Yes indeed.
Not finding what you are looking for?