20 Most Recent Haier DE45EAL Dehumidifier - Page 3 Questions & Answers

sorry to say but the bucket level sensors on these tend to be a bit tricky , it seems theres two possible holes the piviot point for float can go in , only one is correct for sensor to hit right , but both allow float to swing , and there not marked either

Jason, currently the only 45 pint dehumidifier that Haier sell is Model # DE45EK or DE45EK-L or EK-T. If any of those matches the Model Number of yours, you can down load and print the Owners Manual from the link below. However, the model numbers I listed make no reference to Error Code E2. If your Model Number does not correspond to any of those numbers, your unit is probably no longer manufactured or available.

http://www.haieramerica.com/en/asset/product/4ba7175e54

With that said, there are two things you can do. First, turn the Master ON/OFF Switch to OFF. Unplug the unit from the wall outlet and wait 12 - 15 minutes. Then, plug the unit back in and turn the Master On/Off Switch to ON. Did the Error Code clear itself. If so, set the controls as you normally would.

If that didn't solve the problem you can contact Haier Customer Service at 877-337-3639 and they will advise you what to do, to clear the error code.

Hope this helped you to solve the problem.

There is a review website that claims the unit draws 590 watts. The refrigerant this one uses is R-134a. Haier 45 Pint Dehumidifier Review A slightly larger unit is also available from Haier, the DE65EJ that uses R-410a, which is a more efficient refrigerant and allows the unit to be perhaps 20% more efficient. That larger unit is rated for 65 pints a day, and uses 710 watts. It is a bit heavier than the DE45EJ also.

the sweating is on the coils and is the humidity forming into dew drops that collects in the tank if you want the de-humidifer to work as planned you have to restrict new humidity getting into the room ie close the doors and windows.