20 Most Recent
Mitel 5340 IP Phone - Page 3 Questions & Answers
My Mitel 5340 will not
You need to set this extension up in the Call Rerouting form in the PBX. Program the First alternative to go to the voicemail extension.
I have Mitel SX-50, while talking with the person, the call drops and goes on night mode automatically. Is there any solution for this?
Hi, Sounds a bit serious. You could try powering down and re-seating all the cards. It could be a Processor issue. You could also check the Lithium battery on the Program module. I can't remember if the memory chips are soldered to the board or in sockets. It is a long while since I repaired these systems. If socketed, then I suggest carefully lifting each one in turn and re-seating them in their sockets. I have done this with SX20 boards. In time, impurities build up between the Memory pins and the socket and insulate the connection. Re-seating restores the connection, same as for re-seating the main cards.
As a worst case, you could try resetting the user programming code back to factory settings and re-programme. You would need the Installation manual to do this as the programming is unconventional to say the least.
Not finding what you are looking for?