HP D1660 InkJet Printer - Answered Questions & Fixed issues

Please unplug your printer from the power source, wait for 2 minutes, and plug it in again. This usually solves this issue,

Warm Regards,

Selk

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en&product=60398&tmp_track_link=ot_search#N74

Hello, Your HP Deskjet D1660 printer belongs to the HP Deskjet D1600 printer series. That means, the disk you have is for all the printers of the D1600 family, including yours (D1660), so you will not have any problem with the software it includes.

Hello, Please download and run the HP Print and Scan Doctor from www.hp.com/go/tools to resolve the issue. If issue still persists, let me know if there are any error messages displayed on the printer.

818b as black cartridge and 818 as color cartridge

Your rollers may be worn and when they are trying to pick up the paper they are not able to . Buy taking your printer to an authorized technician for a maintenance cleaning this should resolve your issue.

I would recommend first unplugging the device from both the rear of the machine and the wall outlet it is plugged into for thirty seconds. Plug the machine back in and see if the error message returns.

Please check on this support link of HP.Hp Support

check the cartridge fixing position. may be it fix in a wrong position.

Hi
Have you tried resetting the printer ?
Although I am an HP employee, I am speaking for myself and not for HP.

Simply turn printer off. Open door. With a flashlite, look inside to the right side where you'll see a small tray that slides forward and backwards. This is the cartridge cleaner. Push the tray forward (away from you) until it stops then move it backwards until the little black tab on the right is 1/2 inch from the metal part of the carriage. Close the door. Turn printer on. All done. Print something.

Try reinstalling the printer driver.
You can download the HP printer drivers from their supportWEB site. Please click on this link and
select your model printer to download:- http://welcome.hp.com/country/us/en/support.html

if ur printer is connected and detected once go to device manager it show yellow on that princter number or unknow device just right click and install drivers from cd rom or automatically

Hum.... D1660 is not easy to reset the ink level.

Whenever you print.... Press cancel buttom first and Press Power button(with holding cancel button) and let go at the same time... should hold about 3 sec.

At least you can get the print out... Little pain in the ****....

If you would like to save money, try refill kit by "ROADINK". Not only they are easy, but also the printing quality is good. For your better understanding pls check out my youtube video. And will see how easy ink refill can be done.

Hi,

Press the printer's power button to switch it off. It is not as complicated as a computer that you have to follow a proper way of turning it off.

Thank you for visiting FixYa!

Have you refilled your cartridge? or used compatible?

If you refilled your cartridge, either you put in too much ink in it.
Try to **** out the ink and try back.

Your HP60 cartridge can be saved by refill.


If you would like to save money, try refill kit by "ROADINK". Not only they are easy, but also the printing quality is good. For your better understanding pls check out my youtube video. And will see how easy ink refill can be done.

Hello utpal_bose

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3811075&lang=en&

Best regards ,
fanaudi .

Hey!

Take a look here...

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Best regards,
Pelu.

Reboot your computer. Keep canceling and deleting the document. It usually takes a little time for it to sync with the printer, but it will eventually go away.

Try to install your software from here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=3811075&


Remember to select your windows 32 or 64 bit system.

Good luck.

Hi

Please check paper tray cover, make sure it is close. Check also the feeder sensor button and make sure the paper it reaching the sensor button. Insert it correctly. The problem with this out of paper is the paper is not place good. or the tray cover needs to be closed or the sensor button is not touching the paper.

Please me know if you need more help