20 Most Recent HP D1660 InkJet Printer - Page 9 Questions & Answers

If your HP Color LaserJet 4700 is printing with shadows, it could be caused by a few different issues. Here are a few potential causes:

1. Toner Cartridges: The toner cartridges may be low or empty, causing the shadows to appear. It is recommended to check the toner levels and replace the cartridges if necessary.
2. Toner Smears: The toner smears on the drum or the fuser can cause shadows to appear on the printouts. Clean the drum and fuser with a lint-free cloth and check if the problem persists.
3. Fuser Unit: The fuser unit could be malfunctioning and may need to be replaced.
4. Paper Quality: Using low-quality or damp paper can cause shadows to appear on the printouts. Use high-quality, dry paper for better results.
5. Printer settings: Some printer settings can also cause shadows to appear, such as toner density or print resolution. Ensure that the settings are set to the recommended level.
6. Dust or debris: Dust or debris inside the printer can cause shadows, Clean the inside of the printer and check if the problem persists.

It is important to diagnose the specific cause of the problem before attempting to fix it. If you are not comfortable with troubleshooting the problem, it is best to contact HP support or a qualified technician for assistance.

some cartridges [aftermarket] are not recognized or compatible with unit --installed wrong--danage or dirty donnection --damage or failed circuit

The error message "50.2F.00" typically refers to a problem with the fuser assembly in an HP LaserJet 500 color M551 series printer. The fuser assembly is responsible for fusing toner to the paper, and this error can occur if the fuser is not functioning properly. There are a few potential causes for this error message:

• The fuser may not be properly installed in the printer, in which case you should check to make sure that it is securely seated and connected.
• The fuser may be defective, which is most likely the case if the error message appears shortly after installing a new fuser. In this case, you may need to replace the fuser with a new one.
• There may be a problem with the printer's power supply, which is causing the fuser to malfunction. You should check the connections and ensure that the power supply is working properly.

It is also good idea to check for any firmware updates for your printer. Sometimes these updates can fix known issues. The best thing to do is check the printer's manual for troubleshooting or HP Support for specific instructions for your printer. Also you can try to call the manufacturer support.

Hi, please ensure that your printer is not overheating from extensive operating first. If so, please it off for 30 minutes before using the printer again. If you have any external usb drives attached to the printer, please remove them, restart the printer via the power button and check the display again. If all else fails, you might need to factory reset your printer to be able to overcome this issue. Thank you.

There could be several reasons why the copier is producing blank pages. Here are a few possible causes:

1. The ink or toner cartridges are empty or low. Make sure you have new cartridges installed, or try replacing the old ones to see if that fixes the issue.
2. The scanner bed or the glass surface is dirty. Clean the scanner bed and glass surface with a soft, lint-free cloth to remove any dust or debris.
3. The paper tray is empty or has malfunctioning paper. Make sure there is paper in the tray and that it is not wrinkled or damaged.
4. The printer drivers are out of date or corrupt. Try updating the drivers to see if that fixes the issue.

If none of these solutions fix the problem, there may be a more serious issue with the printer that will require professional repair. In that case, you can try contacting HP customer support for further assistance.

Hi, please ensure that all of the cartridges are created by HP and not a 3rd party developer. If not, the HP firmware would stop that one cartridge from printing. Also, you can ensure that the color that's not printing isn't empty. Otherwise, you can check that each color cartridge is properly installed and then restart the printer before moving forward. Thank you.

There are a few possible reasons why your HP Photosmart printer may not be printing pictures, particularly if it is able to print an 8x10 size but not a 4x6 size. Here are a few things you can try to troubleshoot the problem:

1. Check the printer settings: Make sure the printer is set to the correct paper size and print quality settings for the type of pictures you are trying to print. If the settings are not appropriate for the size or quality of the pictures, it can affect the print quality and cause the printer to display an error message.
2. Check the paper tray: Make sure the paper tray is correctly aligned and has enough paper to accommodate the size of the pictures you are trying to print. If the paper tray is not properly aligned or is empty, it can cause the printer to malfunction.
3. Check the ink cartridges: Make sure the ink cartridges are properly installed and that there is enough ink. If the cartridges are low on ink or not properly installed, it can cause the printer to display an error message or produce poor print quality.
4. Check for any visible issues: Inspect the printer and its components for any visible issues that may be causing the problem. This can include debris or foreign objects that may have gotten stuck in the printer, or damage to the printer or its components.

If you have tried these troubleshooting steps and the problem persists, it is recommended to have the printer serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs. I hope this information is helpful. If you have any further questions or need additional assistance, please don't hesitate to ask.

If your HP Designjet 500 is not detecting the new printhead, there could be a few different issues causing the problem. Here are a few things you can try to troubleshoot the issue:

1. Check the printhead connection: Make sure the printhead is properly connected to the printer. If the printhead is not securely installed, it may not be detected by the printer.
2. Check the printhead compatibility: Make sure the new printhead is compatible with your HP Designjet 500 printer. Using a printhead that is not compatible with your printer can cause issues with the printhead being detected.
3. Check the printer firmware: Make sure the printer's firmware is up to date. If the firmware is out of date, it may not be able to recognize the new printhead. You can check for updates by going to the HP Support website and downloading the latest firmware for your printer.
4. Check for any visible issues: Inspect the printhead and the printer for any visible issues that may be preventing the printhead from being detected. This can include debris or foreign objects that may have gotten stuck in the printhead or printer, or damage to the printhead or printer.

If you have tried these troubleshooting steps and the problem persists, it may be necessary to have the printer serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs.

You can follow the given instructions

Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer's USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.

Is your HP Printer blinking lights? HP Printer blinking different type of lights due to technical or mechanical issues. There are various reasons why HP Printer blinking lights. When you have empty paper tray, incompatible ink cartridges, low network connection and more. Follow the simple steps to fix HP Printer light blinking issue.

Perhaps that is why is wasn't used 5 years ago? Open all the doors, front back and sides. Remove cartridges. Use a flashlight to look for a small piece of torn paper. https://www.google.com/search?q=hp+officejet+j4580+paper+jam+error ..

Question edited for clarity, and toss in a few Caps. No model given, but advice and a manual in the link, plus a video on resetting. https://www.google.com/search?q=turn+off+%22oct%22+on+my+hp+calculator ..

Hi, you might need to update the fuser assembly. Please ensure that there are no other issues (ie paper jam or low toner level) before restarting your printer. Otherwise, please ensure that your printer isn't overheating. If so, turn it off for 30 minutes before using again. Thank you.

Question edited for clarity. Full make model. A factory reset won't fix firmware crashes or errors on updates. The firmware is what the machine does before the software is loaded and how it is loaded. A Reset, only reloads the operating software. Error 79 is an easy fix though. You will need to take it to an HP Service Centre if the firmware update is the issue.

It sounds like the printer is holding a print job in memory since it is showing " Printing Document" now on the display. Print Jobs are Stuck in the Print Queue. Disconnect any cables from the printer, except the power cable.

79 Error Message - HP LaserJet Pro 100 color MFP M175nw

https://h30434.www3.hp.com > td-p

HP LaserJet Pro - 79 Errors ' HP® Customer Support

https://support.hp.com > ca-en > document Solution: 79 Service error Turn off then on ... If the message persists, disconnect any network or USB cables and power cycle. If the printer returns to Ready, ...

Question edited for clarity. This is a known issue https://www.google.com/search?q=HP+LaserJet+Enterprise+M607+has+white+screen ..

Hi, please look in the product manual for a description of the specific error and listed procedure to solve it. The procedure may involve a basic power cycle, checking paper trays or some other steps. If the error is not in the manual, please call HP to request more information on the described error. Thank you.

HP Printer does not recognize new cartridges due to cartridge problems, cartridges missing or damaged, and a not compatible cartridge with the printer. Now we discuss each step by step how to fix these errors. ·Make sure installed ink cartridges are compatible with your printer ·Open the ink cartridge access door and remove the ink cartridge from the printer ·Clean the removed ink cartridge with a lint-free cloth. Read more steps to fix HP printer ink cartridge error.

30.03.23 Scanner calibration failure - HP Support Community

https://h30434.www3.hp.com > LaserJet-Printing > td-p Oct 2, 2017 - Error message: 30.03.23 Scanner calibration failure on HP Color LaserJet MFP M680 I have: 1. Turn off the printer 2. Update firmware 3. Restarted - 6354400.

• 30.03.23 error ' HP® Customer Support

  https://support.hp.com > ca-en > document When a 30.03.23 Error Alignment Calibration Failure appears on the control panel, it indicates there is an issue calibrating the scanner.

HP LaserJet Enterprise MFP M630 - 30.03.23 - Printcopy.info

https://printcopy.info > brand=HP > code=30.03.23 Code: 30.03.23; Display: 30.03.23 Scanner failure; Description: Flatbed alignment calibration error. Remedy: 1. Turn the product off, and then on again. 2.