20 Most Recent Sentry Fire Safe - Safe - DS3607 - Page 3 Questions & Answers

no question --and notify sentry customer assistance or a locksmith when dealing with safes

There are several possible reasons why your Sentry Safe MS3817 is not responding to the handle or new batteries. Here are some steps you can try to fix the problem:

1. Check the batteries: Make sure the batteries are properly installed and not depleted. You may also want to try using a different set of batteries to see if the issue is with the batteries themselves.
2. Check the battery contacts: Make sure the battery contacts are clean and free of any debris. You can clean the contacts with a soft cloth or toothbrush.
3. Check the handle: Make sure the handle is not damaged or stuck. You may need to apply some lubricant to the handle to loosen it.
4. Check the lock mechanism: Make sure the lock mechanism is not damaged or stuck. You may need to apply some lubricant to the lock mechanism to loosen it.

If none of these steps help, you may need to have the safe serviced by a professional. As for the factory code, it is recommended to contact Sentry Safe or the retailer where you purchased the safe for assistance. They may be able to provide you with the factory code or help you reset the safe.

limited info generic answer no [factory code] notify or go to sentry site other option locksmith

To change the code on a Sentry Safe CSW3607, follow these steps:

1. Open the safe by entering the current code on the keypad.
2. Press and hold the "*" button on the keypad for three seconds. This will put the safe in programming mode.
3. Enter the current code on the keypad, followed by the new code you want to use.
4. Press the "#" button to save the new code.
5. Close the safe and test the new code to make sure it works.

It's important to note that the CSW3607 has a factory default code of "0000". If you have not changed the code from this default, you can simply enter the new code you want to use without going through the programming mode.

You can open it with a rare earth puck magnet and then change the batteries. Test it with the door open. https://www.google.com/search?q=sentry+safe+open+with+magnet ..

Sentry made safes with 3- and 4-number combinations. The pattern is related to the left/right/left but you have to spin the dial more than 360 degrees on some numbers in the combination. The pattern to unlock the safe for the 3- number combination models is: turn the knob to the left so that 0 passes the pointer three times before you stop at the first number. Turn the knob to the right and stop the second time that the pointer aligns with the second number. Then turn the knob to the left again and stop the first time the third number lines up with the pointer. For the 4-number combination safes, you start turning the knob so that 0 passes the pointer four times before you stop at the first number. Turn the knob to the right and stop the third time the second number aligns with the pointer. Turn the knob to the left again and stop the second time the third number aligns with the pointer. Finally turn the knob to the right and stop the first time the final number aligns with the pointer. Sentry has the manuals for many of their safes on their support site: https://www.sentrysafe.com/support/product-manuals . The direct link to the manual for the 1310 is currently https://cdn.masterlock.com/sentrysafe/resources/pdf/manuals/Sentry-SLS-Old-Models-Instructions.pdf . I hope this helps. Cindy Wells

Contact SentrySafe direct. Or Call a mobile locksmith. They can open it with a rare earth puck magnet. https://www.sentrysafe.com/product/DH-109E ..

There is no such thing as a 'default code'. Safes are made and sent out with a set code which is written down. You are encouraged to change that code to one of your own. Once that is done, the original code is erased and will never work again. There is no default code or a magic code that will open the safe. This is the way to get into the safe. Call a mobile locksmith. Tell them it is an electronic lock and ask if they have a rare earth puck magnet? They will use the magnet to draw back the electronic bolt. https://www.google.ca/search?q=open+safe... There is a second way, you use and angle grinder or concrete saw to cut the front or the back off it. They are very insecure, so you may be able to open it by banging the top with a rubber mallet and turning the catch at the same time! This is called the 'bump' or 'slap' method. Videos. Easy ways to open a Sentry Safe! https://www.google.com/search?q=open+sentry+safe+without+tools ..

Customer Support

Customer Support ' SentrySafe

https://www.sentrysafe.com > support SentrySafe is committed to supporting your needs throughout the lifetime of your safe. View our FAQs, order a key replacement, find your product manual and ...

SSounds like the mechanism is rusty. Spray some wd40 oon the rod and levers that go in the door of the safe and on the pivots of the handle.

notify sentery costumer service or a locksmith

The key should open the safe in any circumstances. All safes of this type have a 4 number combination. They are very insecure and can be open using a Rare Earth Puck Magnet. Then you can remove the batteries, and reset the code. I think you have given us the Serial Number not the Model Number?

Check Your Safe ' SentrySafe

https://www.sentrysafe.com > Support Enter Your Serial Number. Enter the serial number of your electronic fire safe in the space provided below to determine if you need to read an important ... Missing: 633639 ‎' Must include: 633639

• Customer Support ' SentrySafe

  https://www.sentrysafe.com > support Guides to safe setup, troubleshooting, and other support needs. View Videos. Sign up for updates and Offers from SentrySafe. New subscribers get 10% off ...

https://www.google.com/search?q=Locked+out+of+Sentry+BW-633639 ..

hello Don Sentry will make you jump through a few hoops, but they will tell you the combination when it left the factory. It is possible that your parents may have changed it, although most don't. Instructions how to open a dial safe https://www.google.com/search?q=sentry+1310+forgot+combination

Country Select ' Lost Key or Combination ' SentrySafe

https://www.sentrysafe.com > Support Select country for requesting a key replacement and a combination recovery for your SentrySafe product with our quick-and-easy replacement and recovery process.

Ask here. They say they have a manual.

SentrySafe G1459E 14-Gun Electronic Lock Safe Review

https://www.thesafesleuth.com > Gun Safes User Manual - If you have lost the original operating instructions that came with the SentrySafe G1459E then feel free to download a copy of the manual: ... ‎SentrySafe G1459E 14-Gun... · ‎Who Will Benefit From This... · ‎Conclusion

When you select your numbers, try using the numbers before or after the original. The tumblers may be a little offset. The fastest is to call a locksmith.

The plastic plug probably has a screw under it? If not, tighten from under the inner door cover. https://www.sentrysafe.com/product/ef3428e Or contact their support. ..

Contact Sentry for assistance: https://www.sentrysafe.com/support https://www.sentrysafe.com/support

That is the best way. Changing the combination is done from inside the door panel. This is a dial safe, so not quite so easy. Sentry will tell you the original code. Having said that, most people who can't open a combination safe are doing it wrong. It isn't like they show it in the films, one way to number, other way to number, back again to a number and it opens. It is 4 complete revolutions to number, 3 revolutions to number, 2 revolutions to number and 1 part revolution to open the lock bar.Videos that show.https://www.google.com/search?q=sentry+safe+S0310..

You can unlock it with the key. There is a hidden key hole on the front. Unlock it and press the reset button on the inside of the door. DON'T close the door until you have checked the code works with the door OPEN. Check out the video. https://www.google.com/search?q=Sentry+AR-135484+reset+code ..

Call a locksmith.