20 Most Recent Ricoh Aficio SP C231N All-In-One Laser Printer - Page 9 Questions & Answers

The 7,010.43 error code indicates the printer is having difficulty tilting the printhead forward from the parked position to the print position. There are several printer systems involved in tilting the printhead so troubleshooting the error can be challenging. The printer does not directly sense the printhead's tilting position. Instead it applies drive current to the process drive motor, and monitors the motion of the motor's rotation encoder for "following error". For a particular drive voltage the encoder should rotate at a particular rate as the printhead (driven thru the process drive, the DM camshaft, and the head tilt gear train) tilts forward. If the printer does not see the expected encoder readings it assumes a tilt failure. for more hrlp visit CBR Tech Solutions

Last thing you want to do unless you have all the settings information don't recommend doing this

Press user tools/counter then select facsimile then general setting should look for sound and adjusted there will be about 4 different sound settings adjust as needed

same error after running this fix. It does list my printer in "searching for available printers", but when I choose the printer & click next, I still get "cannot connect to printer" & details shows "operation failed with error 0x0000000a."s CBR Tech Solutions or http://www.cbrtechsolutions.com

The manuals are here on how to change that: http://www.ricoh-usa.com/products/product_details.aspx?cid=2&scid=3&pid=2318

If the machine has a 25AMP connector then likely the power draw is such that you need to use the correct connector. Otherwise you may create and overload/overheated connector hazard.

my dear modal no write first

my dear you chek ld unet

my dear you chek develper tenk and imge sensor chek

cleaning all sensor were indicate p-jam

use oem ink

main motor is not able to turn can be lots things start checking sub assemble to see if they turn

Try this: http://www.fixya.com/support/t403613-sc542

Try cleaning the laser unit. If unsure how, give your nearest Ricoh distributor a call to log a service call.

Check the connection to the printer. Check the ports on the driver to see if it's using the IP port or USB. Otherwise the IP's on the network changed.

Try cleaning the feed rollers of the df. Usually it gets dirty.

Usually when it's not loading toner the dev gears on the PCU is worn out. You should call your nearest Ricoh agent for a service call let the technician come and fit new dev gears

This Error belongs to Processing Section, Drum parks, Developer Unit Jam n Hard to move or Transfer belt unit