eMachines ET1161-07 Desktop PC - Answered Questions & Fixed issues

http://www.pcityourself.com/building/frontPanelConnections.php FRONT PANEL CONNECTIONS IN GENERAL. IS THIS WHAT YOU MEAN.

A virus check might not get all malware. Download Malwarebytes free and do a scan with that. Check the add-ons installed in you browsers and get rid of superfluous or strange ones. Use msconfig to check which programs are loaded at start up. Uncheck unnecessary or suspicious ones. Good luck.

This might be a dodgy stick of memory or memory slot. If you have more than 1 stick of memory, see what happens if you just use variations of just 1. Maybe try disonnecting all drives except the one you boot from. And, not sure exactly what you mean by works once and how far it gets after removing the CMOS battery. But does it get far enough to boot from a cd? If it does, try getting hold of a AVG rescue disk this will run a pre-boot virus check which may clear the problem if you're lucky. Obviously you would have to use a friend's machine to burn the disk. Unlikely, but could be a failing powers supply. Borrow one and try it instead. Otherwise, it really sounds like a terminal motherboard issue to me. Godd luck.

Buy a hard drive external usb case,they are around 30 pound,take out the hard drive from your pc and put it in the external case and use another pc/laptop to get all your valuable files off the drive that wont boot.

try changing the monitor, if this fails the video card on the computer needs changing.

That's easy. Open the side panel of the CPU. Locate the battery on the motherboard. Pull it out. Place a fresh one.

Are you expecting a folder or program called 'e machines'? Many machines come with manufacturer branded bloatware, and many users uninstall this stuff to make their machines run better.

yes there is but you have to but HDMI card.

ANSWERD.

http://176.32.96.10/find-manual-online-eMachines-ET1161-07-Desktop-PC/AnswerViewer.do?requestId=41274915 MAYBE.

TRY WITH A OTHER PSU.

Most likely a hard drive problem. When you get the flashing cursor, it indicates a lack of an accessible Operating System. But, if the drive was good you would get a boot failure indication. I would try booting with an XP disc and look for the HDD (or try F2 when you boot) to get to the BIOS and look for the drives there.

A) Power On switch is no goodB) Power Supply is no goodDo you wish to perform the simple test, to see if the problem is the Power On switch, or Power Supply?If so post back in a Comment.Also, IS it an eMachines ET1161-07 Desktop PC?Don't want to 'rattle my lips off', if it's a different computer.http://www.directron.com/atxswitch.htmlPost back in a Comment.Regards,joecoolvette

Need more information. Are you using VGA, HDMI S-Video?

hi ...
whn you say the computer boots up in safe mode..
in this list you should have an option called as load windows normally (similar to this)
use the arrow keys and select it.. and then press enter and please do let us know what happens..
it should ideally work...and if it boots up to your desktop please investigate..

You can remove or change the Window's User or administrator's password. You need access to a computer with Internet access to download the Hiren's Boot CD and burn it onto a CD. Then insert this CD into the laptop/computer and boot up the laptop/computer with the Hiren's CD and follow the instructions. There are very useful utilities CD and it a Linux boot CD which contains quite a lot of Utility programs including a password removal program. Click on one of these links to download HIREN'S BOOTCD :- http://www.hirensbootcd.net/ http://67.20.82.163/

Try this:http://www.ehow.com/video_4774327_replace-computer-processor-fan.htmlGood luck!

it happens when u use ur com continously 10-12 hrss.....

You can't really make a mistake here. Usually if it fits it's ok.Your biggest plug probably has 20 or 24 pins in it. The extra 4 pins may or may not be attached to the remaining 20. This plugs into your motherboard in the only place big enough to fit it.There is another 4 pin that will probably plug into the left of the CPU fan.All the others can plug into your hard drives & optical drives in any order.

Its usually two pins marked PWRSW (Power Switch) or something along those lines. This may help you pinpoint it (red circle).