20 Most Recent eMachines ET1161-07 Desktop PC - Page 9 Questions & Answers

0helpful
1answer
0helpful
1answer

Why will emachine 1358g not boot up monitor goes to sleep just after powering up?

There is no video output from your computer, that is why the monitor goes to sleep, check the cable and the video card.
9/16/2014 7:20:32 PM • eMachines... • Answered on Sep 16, 2014
0helpful
1answer

Emachine in boot manager wont recognise hdd and when starting laptop is i a loop of restarting says it cant complete windows installation and the disks didnt come with plz can you help me

It sounds like you are trying to do an upgrade to Windows 7, as normally the operating system comes pre-installed on the Hard Drive (HDD). If the hard drive is not recognised, then it is a hardware fault, take it back it where you bought it! If that is not possible, check that it is correctly fitted to the hard drive socket, otherwise it is back to a repairer.
9/14/2014 7:05:27 AM • eMachines... • Answered on Sep 14, 2014
0helpful
1answer

Why is my e-machine giving me 4 beeps and wont boot up?

Usually 3 or 4 beeps in a row on many systems is a RAM issue. If you have multiple RAM sticks try to remove one while the system if off and unplugged. Turn it on and see if the beeps continue. If so, remove the other ram stick and put back in the first stick you removed. Repeat the process for each stick of ram until the beeping stops. If it stops, this means you have found the bad ram module and can replace it. Some computers requires ram to be installed in pairs, and that the pairs match (Check the stickers on the ram to ensure both are the same type and speed) If the problem continues after removing and testing each stick of ram, you may want to have a service professional / Computer Repair shop take a look at the computer for further testing.
9/6/2014 3:55:48 AM • eMachines... • Answered on Sep 06, 2014
0helpful
1answer

Hash key

Hash key location will depend on language you're set up for. My keyboard has the hash on a shifted "3". "#"
9/4/2014 12:00:52 AM • eMachines... • Answered on Sep 04, 2014
0helpful
1answer

F12 boot

Once black "highlighted" press enter.Options to enable or disable will appear.
8/31/2014 3:13:40 AM • eMachines... • Answered on Aug 31, 2014
0helpful
1answer

WHAT KIND OF MOTHER BOARD DOSE THE T2984 TAKES

Apparently, The motherboard for the t2984 is a SEABREEZE T3 according to the eMachines Parts Depot... http://hardforum.com/showthread.php?t=1089862
8/30/2014 5:47:06 AM • eMachines... • Answered on Aug 30, 2014
0helpful
1answer

Why password is not accepted

1. Password incorect- try to key in another one. 2. Caps Lock is ON or OFF. Try to remember is there any CAPITAL letters involved. 3. For God's sake stop spying on your fiance, and leave her(his) computer alone! :D
8/17/2014 3:03:29 PM • eMachines... • Answered on Aug 17, 2014
0helpful
1answer

Idiots. Cant't someone answer MY QUESTION? i perfectly content and eveythng worked before you made me change the password. I have no gotten any mail since then, though I can send it. My kids wan

try not calling people who may help you idiots, you're not likely to get any meaningful help from strangers by being rude. And change from AOL. your kids are right. use gmail instead. If you really want password help regarding AOL email you need to contact the only people who can help - AOL. try 1-800-827-6364 for USA or 0844 499 5555 for UK
8/15/2014 3:55:40 PM • eMachines... • Answered on Aug 15, 2014
0helpful
1answer

Have emachines monitor which is not coming on power button fast flicker

Which power button is flickering (your computer, or your monitor). Here's some tricks I would try... 1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor. 2. Verify the monitor cable is firmly connected to the computer and the monitor. 3. Verify that you have turned the monitor power switch on. 4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works). 5. If the power light on the monitor is not on, try a different power cord. 6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced. 7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers. Good luck.
8/4/2014 12:04:55 AM • eMachines... • Answered on Aug 04, 2014
0helpful
1answer
0helpful
1answer

Our monitor on/off button is not working well. sometimes it won't turn on, other times the blue halo flashes on and off. is there a simple solution or is it just failing?

Check all connections. Here's some tricks I would try... 1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor. 2. Verify the monitor cable is firmly connected to the computer and the monitor. 3. Verify that you have turned the monitor power switch on. 4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works). 5. If the power light on the monitor is not on, try a different power cord. 6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced. 7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers. Good luck.
7/30/2014 3:33:09 PM • eMachines... • Answered on Jul 30, 2014
0helpful
1answer

What to do when, continued on bottom

reformat your hard drive and put a fresh copy of windows on it is easiest to do
7/16/2014 6:18:04 AM • eMachines... • Answered on Jul 16, 2014
0helpful
1answer

How to identify function key on emachines keyboard

the function key should have Fn on it or something of the like to identify it as the function key
7/7/2014 2:57:19 PM • eMachines... • Answered on Jul 07, 2014
0helpful
1answer

Power button not working

either a bad power switch or your power supply is bad I would think the later is the problem
7/1/2014 4:22:03 PM • eMachines... • Answered on Jul 01, 2014
0helpful
1answer

I have a Emachines keyboard/KB-1080.I muted my

you should be able to go to control panel/audio or sound and find your output device and unmute it that way
7/1/2014 4:20:00 PM • eMachines... • Answered on Jul 01, 2014
0helpful
1answer

Can video card be upgraded in emachine el1358g-51w

yes you can upgrade the graphics card, you have integrated graphics but you can purchase a PCI-E graphics card and bypass the on board graphics but keep in mind you'll have to buy a "low profile" graphics card as there's not much room in your case and a full size card will not fit.
7/1/2014 4:17:59 PM • eMachines... • Answered on Jul 01, 2014
0answers

ERROR CODE 0X5

Be the first to answer 6/9/2014 6:26:26 AM • eMachines... • Posted on Jun 09, 2014Be the first to answer
Not finding what you are looking for?
eMachines ET1161-07 Desktop PC Logo

77 questions posted

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

Andrew Chrostek
Andrew Chrostek

Level 1 Expert

187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

E eMachines

  • E eMachines

Most Popular Question

emachines et1161 07 freezes e logo only

  • Computers & Internet
Loading...