20 Most Recent LG BH08LS20 Blu-ray Burner - Page 3 Questions & Answers


It is not going to work. Both wifi and ethernet are for internet connection only. Ethernet is much faster than wifi. Also there is possibility to damage tv by plugging ethernet cable which is connected device using POE (power over ethernet). You need to connect your dvr via hdmi, component or composite cable

LG Computers &... | Answered on Feb 04, 2019


Try another monitor or computer to determine what is problem. It could be monitor, cable or computer video card

LG Computers &... | Answered on Feb 02, 2019


It may not be getting a signal,; the bars could be a test pattern.

LG Computers &... | Answered on Jan 24, 2019


go into settings and change the region. but some DVD players will not let you change the region. but some will. just change the region to 1

LG Computers &... | Answered on Dec 20, 2018


Sounds like there was an accidental change to the brightness control. Try unplugging the TV overnight and see if it will reset to factory setup. If that doesn't work use your flashlight to see if you can get to the menu page for brightness and then move the control to the middle-- it will bring up the brightness. Also, you can try to find the menu item to reset all controls to the factory settings. Look in your manual or find the manual on-line.

LG Computers &... | Answered on Nov 26, 2018


Hi, that message indicates that your video source is providing an unsupported video resolution , please check in settings that video output resolution is no more than 1920 x 1080 @ 60Hz.
Also remember to verify that HDMI is selected as input source at monitor.

LG Computers &... | Answered on Nov 14, 2018


DVD REGION FREE & BLUE-RAY REGION FREE
To change the Region code on your DVD player, open Control Panel - System - Hardware - Device manager, and click on DVD/CD ROM drives, then right click on the DVD drive and click Properties then click on DVD Region.
You can enter a new region and it also shows you how many changes have been made.
NOTE you can make only 4 changes and the player will lock permanently on the 4th change.
If you want to play DVDs from any region you maybe able to upgrade the firmware to make it region free BUT if you make a mistake or installed the wrong firmware the player will be a piece of junk.
The best solution to make the player region free is to install a piece of software (Passkey for DVD) that allows you to play DVDs from any region and Passkey for Blu-ray that allows you to play Blu-rays from any region. There are several available on the Internet but my favourite is DVD-Region Free From: -
www.dvdfab.com/products,free.htm

LG Computers &... | Answered on Nov 13, 2018


On another device make sure you are signed in. Double check passwords.

LG Computers &... | Answered on Nov 09, 2018


you try different outputs? Did you try to unplug your set and leave it unplugged for about 15 minutes and then plug it back in? You checked your menu to ensure all settings are properly set? What have you tried?

LG Computers &... | Answered on Nov 07, 2018

Not finding what you are looking for?
LG BH08LS20 Blu-ray Burner Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top LG Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Alun Cox

Level 3 Expert

2679 Answers

k24674

Level 3 Expert

8081 Answers

Are you a LG Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LG Computers & Internet

  • LG Computers & Internet

Most Popular Question

got old 407291 software version

  • Computers & Internet
Loading...