20 Most Recent Nokia E52 Smartphone - Page 8 Questions & Answers

This often happens when your battery is not having perfect contact with the terminals and as a result, it prevents the power from your power outlet ot easily flow into the battery and charge it.
The easiest way toi tackle this problem is to follow the following instructions.
1.switch off your phone and remove the battery,
2.Use a dry lintless cloth to clean the battery terminals and the points of the battery that comes in contact with the terminals on the phone.
3.replace all parts and try again.
if this doesn't solve your problem, then your battery could be completely dead and needs replacement but contact a technician first.
hopw this was useful? Please dont hesitate to comment for more information.

call your service provider for the 3g settings .they will provide it for you.good luck

It seems that your phones firmware has corrupted.you musttake it to the service store or if you are good enough with computers,followthese instructionsFirst download and install Pheonix. NokiaPhoenix Service Software 2011 -Download secondly Download flash file from this link Nokiaflash fileandinstall it to C / programme files/pheonix..afterfinishing this installation open pheonix Inside theinterface at the> left top File" click there and choose "openfile" and then select the appropriate Product type i.e"whichis written in the back banel inside the battery of every Nokia(Type RM-000).Afterdoing this again at the left top count from "File"1..2..3..the 4thone is "Flashing" press there when you click there you'll seethreeicon just select the "Firmware Update" again you'll seeanother interface .Look at the product code there should be blank and put your "mousetool" at the straight end from the "Product Code" thereis a Botton and choose the code which is written in the back sideof your phone. e.g CODE:0000000.if the same code does not found, justtake one.After this you can see "Dead phone USB flashing" clickthat box .Now this is the last stage... Connect your phone with the USBtoyour PC and let the driver install ...wait for a moment.(If yourphone working).Lastly after just finished (In case your phone isDead,unable to switch on in normal mode start from here) Connect thephone to pc without powering...insert good battery and Click the "Referbish"afterthis, a message will prompt you "press power botton"press it and wait untill the phone will Restart automatically

hi there i have a problem of nokia e52 when i try to on it but not on just vibrate and not giving display

Try doing a hard reset for the phone and then see if the phone works. A hard reset will ensure that the phone memory is formatted and all the factory settings are restored but doing a hard reset will delete all the files. To perform a Hard reset on the phone, Locate the following keys (* , 3 and talk/green key). Press all the above keys along with Power button and keep it pressed till Nokia booting screen appears. After hard reset, see if the phone is able to boot or not.RegardsAJay

smartphone is not smart very bad mama so what u will do call the customer care and ask the puk code or if you have problem with security code just go to setting < keygard setting < and type 1234 or 12345 ok this is common code for mobile ok ......

How delete install log?

seems there is some problem with the firmware. use nokia software updater and reinstall your symbian phone. everything will be fine

go on this
www.software112.com/.../nokia+e52+flash+player.html

If you want to reset your phone to factory setting, you can try this option to restore it to the original operating system from the ROM. this option Formats the C: partition and deletes all data including the memory card.
Enter this Key Code *#7370# (click this combination of keys on the keyboard
in the mobile) or
Press and hold down following keys immediately after pressing the "ON" on the mobile to turn it on:
* + 3 + Green Button (call), that is (*3 and the green call button all at the same time) if you do it well, your phone should go back to factory setting.

install BLACKLIST software from net into the phone
it works well i have tried it.

VISIT THIS-http://total-recall.en.softonic.com/symbian
DO VOTE FOR ME THANKS AND BEST OF LUCK IN FUTURE. BYE.

daghari_bech, Please try below steps: Menu > Ctrl. panel > Settings and General > Personalisation > Language
Once your in, you can select the language options, hope this helps!

hi you can use codes to unlock your mobile .you can
get the codes from here mobile-unlocker here they ask the
following details before rendering the codes they are
1.mobile model
2.country from where you brought the mobile
3.provider to which the mobile is locked
4.imei number of the mobile
finally they will send you the unlock codes once
you entered the codes in your mobile as for the instructions provided by them then your mobile get
unlocked and it will accept other network sim.

*#7370# is the format code.If you don't know the security code, try to generate the code from this trick

1. Downoad [ANT] Simple Ant Simple.zip

2. If you have Nokia PC Suite running, be sure to close it by exiting from the taskbar icon.

3. Extract [ANT] Simple ] and run Simple.exe located in the folder

4. Connect the phone via USB to the computer by selecting Pc suit/Ovi suit when prompt a message in your pone.

5.After you've connected your phone, Click "Read Info"

6. On the MAIN tab, click on GET. Your phone IMEI number and model should be displayed on the bottom panel as shown below

7. Now click on the SERVICE tab and click on GET button under USER CODE

8. Your security code should now be displayed on the right side of the application window.

Thanks For visiting Fixya

Just format it by using this FixYa.com - Customer Support, Products Repair, Manuals & Troubleshooting on Any Product This is my experience.Goos luck