20 Most Recent Necchi 3537 Mechanical Sewing Machine - Page 9 Questions & Answers

https://www.sewingpartsonline.com/instruction-manual-necchi-3204fb.aspx

Is this a problem or a description. Either way, I need more information. Thank you

If you do an internet search for "necchi 3205 threading" As an 'image', you will find many images with either the 3205 or other similar Necchi machines. I tried to upload an image to show you, but was unable to get it uploaded. But you will have no problem finding a detailed image online either of the 3205 or one that is very similar.

When I repair a machine I use triflow oil on any metal to metal rotating part ie back and forth. On metal gears I put the tri flow grease. You can use it on plastic gears although sparingly. the nylon gears were design for quietness and were not recommended for grease. You want to get the old grease off as best you can. If it goes up and down or side to side then oil. If it continuously rotates then grease. Exception those bearings that have an oil hole vs a grease cap.

I found an article that may help you. http://www.rugandrelic.com/Category/Rugs-and-Kilims/All-About-Rugs/Nine-Indicators-of-Rug-Quality.aspx For more help check us out at: FreshRug The Rug Cleaning Repair Company

https://www.google.com search shows it for sale online: https://www.ifixmachines.com/index.php/product/1615-necchi-sewing-machine-586-silvia-maximatic-manual https://www.sewingpartsonline.com/instruction-manual-necchi-586.aspx https://www.sew4less.com/product/603/Necchi_586_Manual

Try manualsonline.com or manufacturers.

Best take it to a technician, but you may need a new foot pedal as this one sounds dangerous.

if you have a drop in the thread should fall off to your left hand when holding it up. but if itis a front loading type the thread falls off to the right.

Yes quality of thread could definitely affect sewing, as will a blunt/old/wrong size needle for the material used. Also must have same thread in bobbin and needle also corect thread and needle size for material sewn plus correct tension for that material too. Could be lint or tangled threads underneath needle plate too.

Check here. Results are usually good. Sewing Parts Online

MFG website.

Contact a vendor:https://www.sewingparts.co.uk/machines/clip-on/necchi-3205.htmlhttps://www.sewingpartsonline.com/necchi-3205fa-sewing-machine-parts.aspx?filter.ptype_gmcfeed_1=%20Machine%20Needles&sort.ss_cat_sort=desc&index=22