20 Most Recent Singer CE-200 Quantum Futura Computerized Sewing Machine - Page 8 Questions & Answers

http://parts.singerco.com/CPpartCharts/alpha/CE-150_250_350__SES1000_Parts_list-07_08.pdfthis shows aa parts ,mine suddenly started to do this today. VERY LOUD

you should have more than one usb plug,try a diff one

Ok, first of all never do that trying to force it to work thing. It is beeping because there is a problem. Stop... unplug it, remove your work and discover what is wrong. (Likely that you've got thread under the bottom of the feed dogs ... but it could be something entirely computer related... since these are computers... they don't like extreme heat OR cold.

Is the need in upright position ?

or have you fitted the embroidery hoop correctly.
If all else fails switch off and start up again - should then automatically go to correct position.

I'm sorry... Modern singers are junk.... in fact most modern domestic machines are junk.

Lisa, I cannot solve your problem because I have the same one. After paying for shipping twice to the Singer repair that Singer told me I had to use the machine is still not working. I am so mad and disappointed at Singer. I think a class action lawsuit would be great since these machines are lemons!

Check whether you have 32bit or 64bit Vista. 64bit is not supported.

Use the Needle Up/Down button to skip Forward thru a Design.

Double check your threading, 1 first point to enter for tread (a).. then around little cog down and up again down.to needle thread it (b)at A tuck on it.. make sure foot is up.. you will hear a loud click pulll thread down.. thread needle now while threaded... see that long metal horizontal plate under the machine but above the needle.. pull the thread behind it.. if you look at it you will notice the natural flow path.. you will hear a tiny click thats the sensor.. ok back to the top... where you first threaded the thread give it another little tuck you will hear a tiny click.. ok.. sensors seen the thread.. now unless your tensions are wrong.. it all should run.. with the right thread and materials.. also is the bobbin in ok? it unwinds anti clockwise.

It must not be inserted right, check your manual and if you do not have it handy, go to singerco.com and download one for free. You can cause real damage if it is loose, so be careful that something isn't broken and not letting it seat right.

since it is a embroidery machine I would suggest the technicanto be on the safe side

It depends on your software version. The list of supported formats could be found in the manual, on Futura support site or checked right through the sofware menu (File->Open, File->Save as)

Have you checked the information at the Singer Co site?

http://www.singerco.com/resources/operation_basics.html