GE Spacemaker 26976 Cordless Phone - Answered Questions & Fixed issues

Does it have a battery backup? If so, after disconnecting the AC power adapter, remove the battery for 15 minutes, then re-insert it (make sure it is a good battery), plug the AC adapter back in, and try again. Hopefully, this will re-set it. If not, it probably isn't worth tryiing to repair. May have to buy a new phone.

Apparently you have the answering machine turned off. When speakerphone is OFF (not in TALK mode), press flash/program button and CID VOL(+) / CID VOL(-) arrow keys to move the pointer > to point at ANSWER ON/OFF, press flash/program button to show SET ANSWERER ON OFF.Use the CID VOL(+) / CID VOL(-) arrow keys to select ON.If you need one, you can download the manual here.

Welcome to Fixya

Unplugged wall unit from the 110 volt outlet and the phone line from the unit for about 10 or more minutes. The phone worked after the phone line was reconnected and the wall unit plugged back in.
Thank you for using Fixya! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Here is a link to download the manual in pdf format.

http://www.home-electronics.net/USER-GUIDES/26976_DOM_ES_CL_IB.pdf

REMOTE ACCESS

This section explains the remote access process for use with any touchtone

phone.

1. Dial the phone number for the answering machine.

2. After the answering system answers, press any numbered key on the

touch-tone pad to bypass the outgoing announcement, or wait until

the announcement finishes.

3. Enter the security code after you hear the tone.

4. Follow the voice menu to use the answering machine's remote functions.

The remote feature enables you to perform the following functions:

To Press this button

Review message 1

Play back messages 2

Stop message play back 2

Erase message 0

(during message playback)

Skip message 3

Turn off/on answerer 4

Review voice menu options 7
No valid dialing tones for 15 seconds will hang up the telephone line.

You can get the manual on the link below if you need page 31.

http://www.home-electronics.net/USER-GUIDES/26976_DOM_ES_CL_IB.pdf

Good luck

That has been a common problem with this design..many have complained with the poor sound quality...

Unplugged wall unit from the 110 volt outlet and the phone line from the unit for about 10 or more minutes. The phone worked after the phone line was reconnected and the wall unit plugged back in.

Dont know which solved the problem but I suspect it might have been unpluging from the 110 which could have reset the wall unit.

That will be because the static was at the callers line, not at your end. At this time of year it is water in junction boxes at the caller's residence. If it was on every call, it would be down to your connections.

Question edited for a lot more clarity. You are only the second person to have this issue. Refer to the manual and do a reset, but in doing so you will lose all saved data. https://www.google.com/search?q=general+electric+ge+27956fe1+white+screen+fix ..

Remove all the phones on the system. Remove all the handset batteries. Plug in one old style corded phone to the main phone jack, it is normally the one closest to the front door. Do you have dial tone? If not, it is your Telco. If you have a dial tone, plug all the other phones in testing for a dial tone as you go.

A leak coming from the front of a front-load washer is often caused by a damaged or dirty door seal. If the door seal is cracked or loose, it will need to be replaced in order to restore a watertight seal. Always ensure all clothes pockets are empty prior to washing, as objects left in pockets can damage the door seal.

Line in use means another phone is being used. If you have more than one phone, the second phone is off the hook or someone is already using the phone. Check all phones and be sure they are hung up.

Posting a follow-up as a new post doesn't work here at Fixya because posts are not threaded by poster or previous posts. Therefore this post has no context to your previous post. Also worth noting that it was 15 days ago!If you click COMMENT under Fred's answer, he will get a notification and come back to help you. Thanks Karenhttps://www.fixya.com/support/t29866451-ge_speaker_phone_29480ge2_when_someone..

only the service provider can activate that and it costs more money

If you mean the long-life lithium backup battery for the corded 2-line GE 2-9421 (A indicating the sales region), that is a 3V Lithium battery. The part number 5-1923 appears to be a common CR2032 coin cell battery. These are used as backup batteries for Eraseable Programmable ROM on many devices, including computers.. One source is https://www.batteriesdirect.com/product/details/button-cell-batteries/ge/5-1923 . Any CR2032 from a reputable manufacturer will work. I hope this helps. Cindy Wells

Probably you wont be able to change password without erasing all messages. That is the point of having security code

https://www.geappliances.com/ge/service-and-support/literature.htm

https://www.searspartsdirect.com/manual/4tnzhmkqk9-000432/ge-gss20gewpbb-side-by-side-refrigerator

try setting the original time on the machine correctly all recorded data is set from that original time setting