Top 20 Sharp AR-M160 Black and White Copier Questions & Answers

Fixing unit is bad the very hot part of the machine is bad replace the fuser unit Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace toner , just test toner motor first , and test developer unit is turning , and clean developer sensor,

EEPROM error , need to order a new EEPROM from Japan, or a mainbord issue need to replace , no reset available

You can sell it safely, copiers have no hard drives. No data is saved on it permanently.

"Press # - Interrupt - C - Interrupt -14 - Start key" Thermistor open The thermistor is open. The fusing unit is not installed.

error is sometimes a way for the machine to go into safe-mode when there is power fluctuations , or a problem with the machines thermistor or thermostat

specify the operating systemsystem bit rating

Please replace all faulty consumables.

Most printers come with a cd that you have to put on your computer. The cd's have to drivers on. If you don't have the printer cd any longer, maybe contact the manufacturer or any electrical store, they may be able to order one for you.

http://esupport.sharp-eu.com/eusearch/?TemplateLang=en&Lang=&DocTypeItem=DRV&Lang=gb&SearchString=ARM165&Show=Y

"Press # - Interrupt - C - Interrupt -14 - Start key Thermistor open The thermistor is open. The fusing unit is not installed.

it seems to be the problem of the drum.how many copies has it yielded .call a rep and change it

There is need to solve the low current problem by simply rectifying it frfom the power supply.
enter simulation (use SIM14) 'C' 'auto' 'C' 14 copy key

'C' 'Auto' 'C' '14' copy key in quick succession

check the sensor lever

in order press P * C * or # * C *. the machine will go into diagnostics. Then enter the number 14 as if making 14 copies. Then enter 1 and press start. That should reset your machine.
PLEASE let me know if this fixes it.

The F5 normally means your lamp is bad. Or the CCD assembly Behind it. At any rate you would have to replace the lamp carriage assembly.

the user guilde is available on the net free

have you got the machine on print mode

if you find the button that says print copy fax on it press it until the light is on copy...

hope this helps

http://www.driverwizard.org/wizard/w?ms.driversfor.wizard