20 Most Recent
Sharp AR-M160 Black and White Copier - Page 7 Questions & Answers
SHARP AR-5623NV Alarm Indicator Light On
If the light is steady, check the paper in your paper tray (or bypass tray, if that is currently selected). Add paper. If there is paper in the tray, try putting fewer sheets in the tray. If the tray is too full, sometimes the printer can't pick up the paper. Similarly, if the tray is nearly empty, try adding paper. Next consider taking all of the paper out and refilling the tray with paper from a new (just opened) ream. If the paper picks up atmospheric moisture, it can warp and be hard for the pick up rollers to handle.
If these steps don't solve the issue, the problem may be the paper pickup rollers themselves. The printer may need service. (If it is under warranty, contact the manufacturer.)
The manual for the printer is available here:
https://www.sharp-cee.com/cps/rde/xbcr/documents/documents/om/34_ppc/AR5618-D-5620-D-5623-D_OM_GB.pdf . See page 87 (page 89 of the PDF) for the troubleshooting guide.
I hope this helps.
Cindy Wells
Sharp MX8090. Error code L1DF101?
Hi,
Please double check that your printer firmware is up-to-date. You might need to visit the manufacturer website (Sharp) and update the firmware if you haven't done so in a few weeks/months. Thank you.
Sharp XV-Z30000 projector won't turn on.
Probably the lamp light is flashing because either the lamp has failed or there is a fan issue.
We spell some words from the French way; Metre (measurement of length) but colour will always be colour.
The thirteenth element in the periodic table is not spelled aluminum, it is Al or Aluminium!
That's got me started now!!!
I want Flash code for Sharp Al 1216 photocopier
Purportedly, H4 refers to heat lamp problems, either broken heat lamp or dirty thermostat on the heater roller assembly. It may be referred to as the fuser temperature error.
It may also be a false reading and just need clearing.
If it is simply toner caked on the temperature sensor, such has to be scraped off. If a false reading, you can try to clear it with the following. Press P-interrupt-C-interrupt and enter test command 14 and Execute to clear your error. Or try Press this sequence: CLR-Exposure-CLR-Exposure; The display will go blank; enter "14", press "PRNT"; Press "CLR" several times to exit.
Also, you can try turning off the machine for 30 seconds and then turning it back on to see if it clears the problem.
If none of this works, it may be a bad thermistor (a resistor) on the temperature sensor.
How can I fix faint copy in sharp mx-m564n copier?
This could be fixed by cleaning the glass lens on top of the copier, which would make sure that your paper comes in contact with only one spot of light as you press your keys. This way, there will be no distortion from multiple spots hitting the same place on your paper. The printer also needs to be set up correctly before you can use it again, so check out this guide for more information.
Not finding what you are looking for?