20 Most Recent Panasonic VIERA TX-32LZD80 32 in. LCD TV TV/HD Combo Questions & Answers

BECAUSE THE QUESTION WAS ASKED BACK IN December 8, 2010, it is more likely that he has moved on. Anytime you have a product UNDER WARRANTY, USE IT OR LOSE IT. THINGS HAPPEN. DEVICES FAIL.

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty. Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Three blinks of the power LED indicates an over-current or over-voltage condition in one of the DC supplies of the AP board. The AP board is repairable. Therefore the use of an ohmmeter and peak-hold-voltmeter is required to determine the cause of the shutdown. An over-voltage condition is definitely a defect of the AP board. An over-current condition may be due to a short circuit located in the AP board, A board, or the LCD panel.

Could be a bad remote, that button isn't responding

Here's the manual; http://www.manuals365.com/swf/panasonic/tc50pu54_adv.html Hope this helps.

Panasonic Viera TC 42PX24 Operating Instructions Manual https://panasonic.net/cns/prodisplays/download/pdf/instructions/TH-55_49_42AF1U_W_Eng.pdf https://www.manualslib.com/products/Panasonic-Viera-Flat-Screen-Tv-2309480.html

I had the same problem with my Viera. if you disconnect the power and ribbon cable from the YSUS board (check youtube for how), the light led will blink 6 times, indicating the YSUS is bad. Check ebay for TNPA5175 board (about $115-160). The pop is one of the DG402RP chips burnout. These are about $4, but only available from China. If you can wait a month for delivery, you can solder the new one to replace the bad one. You may want to purchase several in case more are bad or it happens again.

That probably won't work. You'll have that problem until you get a new TV.

I would say that's pretty much had it ,if there's smoke coming from the back something has burnt out I would take it to a TV specialist to see if it can be repaired Nick

Need service, your safety shutdown circuit is functioning properly.

well, this tutorial may be helpful, but I am not sure because I do not really know your question. Samsung TV MP4 Solution The Best Way to Samsung TV Won Play MP4 Files