GE 30 in. JGP336 Gas Cooktop - Answered Questions & Fixed issues

usually the spark module is not put back together properly. 1 make sure the spark unit is clean 2 make sure the gas jet is pointing towards the sparker 3 make sure there is no aluminum foil or other metal near the sparker pulling the spark away from the gas

Hi,

Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...

Gas Range Repair Burners Keep on Clicking

heatman101

on mine I just pull up on front egde and it will raise. There is an arm that will catch to hold it up while cleaning.

Hi mikegou100,

I believe your ignition switches have come in to contact with either water or moisture.

Please read my below Tip on how to fix the problem:

GAS KITCHEN APPLIANCE CLICKING SOUND...

If it does not solve your problem, I'd suggest replacing the ignition switches.

Kind Regards

JEDEMEYER1

* If you found this solution helpful, please rate it

Usually, the igniter is contained in the same switch ( control knob) as the gas flow. When you turn it on, you should hear a clicking noise. I've never seen one of these with a separate ignition system. Sorry if that's not the problem tokfm

Hi,
Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range RepairBurners Keep on Clicking
heatman101

Hi,
Here is a tip that I wrote to give details about why your cooktop will notspark to light the burners..

Cooktop Range Stove spark ignition does not work

heatman101

b,bm

Hi,
Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range RepairBurners Keep on Clicking
heatman101
erty3

Hi,

Here is a tip that I wrote to give details about why your cooktop will not spark to light the burners..

Cooktop Range Stove spark ignition does not work

heatman101

Hi,

Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...

Gas Range Repair Burners Keep on Clicking

heatman101

Hi,
Here is a tip that I wrote to give details about why your cooktop will not spark to light the burners..

Cooktop Range Stove spark ignition does not work

heatman101

Tighten up the burner orifice with a wrench.

Hi,
Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...

Gas Range Repair Burners Keep on Clicking
http://www.fixya.com/support/r4033033-gas_range_repair_burners_keep_clicking

heatman101

Hi,
Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting.

Cooktop Range Stove spark ignition does not work
http://www.fixya.com/support/r5649407-cooktop_range_stove_spark_ignition_not

heatman101

Hi,
Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...

Gas Range Repair Burners Keep on Clicking
http://www.fixya.com/support/r4033033-gas_range_repair_burners_keep_clicking

heatman101

Hi,
Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting.

Cooktop Range Stove spark ignition does not work
http://www.fixya.com/support/r5649407-cooktop_range_stove_spark_ignition_not

heatman101

I have a GE Model Cooktop JPG337BEJ3BB and the burners are flaming to high. How do I turn them down?

Hi,
Here is a tip that I wrote that will help you with that...

http://www.fixya.com/support/r4033033-gas_range_repair_burners_keep_clicking

heatman101

Hello

Check the pilot light?

John

You have to determine if it is the electrode or the ignitor module and replace the component. A simple test is to swap the wires on the spark module for the non working one and see if the other electrode still works. If not the electrode is bad, if it does than the module is bad.
Eric