20 Most Recent GE Profile JGP636 Gas Cooktop - Page 4 Questions & Answers


Hi,


Your problem could be or probably is with the regulator...the regulator is sticking......

Propane, LP, or Natural Gas Regulator Problems


heatman101

GE Profile... | Answered on Jan 08, 2011




Hi,


Here is a tip that I wrote to give details about why your cooktop will not spark to light the burners..

Cooktop Range Stove spark ignition does not work

heatman101

GE Profile... | Answered on Jan 04, 2011


The way you are describing your problem it sound like the gas supple is weak and pops off. On older Ge Profile cooktops things like grease can get stuck in the orifice spud. To get an idea of what Go to you left burner take off the cap and burner head and look into the hole. You will see a gold spud with a tiny hole. This is called the orifice spud. Make sure the hole is not jambed with grease. You can take it off by using a 7/16 driver w/magnetic tip. Look closely and use a tooth pick or paper clip to clean. and reinsert. If you still have a problem then the issue is in the valves itself. national_a_r_0.png
Change out the left 2x valve.
Have a wonderful day and please rate me a "4" if i was helpful.

GE Profile... | Answered on Dec 14, 2010


Yes, thats okay when you turn the knob voltage gets sent to the spark module, Then the module sparks all the burner igniter. And frame ignition only happens on the single burner of the knob you turned that sends gas to the burner associated with that knob.


Please rate me a "4" if this information was useful.

GE Profile... | Answered on Dec 14, 2010


plug it in

GE Profile... | Answered on Dec 05, 2010


Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101

GE Profile... | Answered on Nov 07, 2010


It's really simple. Remove the burner grates, removed the old drip pans, then drop in the new drip pans. You can order a new drip pan from partselect.com if you don't have one yet. Let me know how this works out and if you need any further help.
Benjamin

GE Profile... | Answered on Nov 04, 2010


Ideally you should be venting it - not because of the odours from the cooked meals but because the gas when it burns it generates combustion residues that in the long run can cause troubles. This is true for every single gas powered unit .

GE Profile... | Answered on Nov 02, 2010


got water under the knobs the ignition keeps clicking what do i do

GE Profile... | Answered on Oct 27, 2010


Hi,
Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range RepairBurners Keep on Clicking
heatman101

GE Profile... | Answered on Oct 09, 2010


Hi,
That is not that hard to fix and you can easily buy the parts yourselfonline...

Here is a tip that will help you with the online buying...

How to Buy Appliance Parts Online

heatman101

GE Profile... | Answered on Oct 03, 2010


Hi,
Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range RepairBurners Keep on Clicking
heatman101

iyooyi

GE Profile... | Answered on Sep 30, 2010


Hi,
Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range RepairBurners Keep on Clicking
heatman101

GE Profile... | Answered on Sep 27, 2010


Hi,
Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range RepairBurners Keep on Clicking
heatman101

GE Profile... | Answered on Sep 17, 2010


If all the burners are trying to ignite at the same time - the ignitor module is to blame.
If it is one specific burner - take a look at that individual knob.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

GE Profile... | Answered on Sep 05, 2010


Hi,

Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...

Gas Range Repair Burners Keep on Clicking

heatman101

GE Profile... | Answered on Aug 30, 2010


Hi,
Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting.

Cooktop Range Stove spark ignition does not work
http://www.fixya.com/support/r5649407-cooktop_range_stove_spark_ignition_not

heatman101

GE Profile... | Answered on Aug 21, 2010

Not finding what you are looking for?
GE Profile JGP636 Gas Cooktop Logo

193 questions posted

Ask a Question

Usually answered in minutes!

Top GE Cooktops Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Paul Carew

Level 3 Expert

3489 Answers

Are you a GE Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Cooktops

  • GE Cooktops

Most Popular Question

igniter ge

  • Cooktops
Loading...