Pentax ESPIO 160 QD 35mm Film Camera - Answered Questions & Fixed issues
Pentax spotmatic f
Eric Hendrickson: http://www.pentaxs.com/index.html
11/28/2016 3:17:57 AM •
Pentax...
•
Answered
on Nov 28, 2016
•
342 views
Flash on all time in auto
Please, which camera model? Are we talking about the external flash or one built in? If it is built in the camera may think there is not enough light thus setting the flash to fire. That is what auto does, it takes all the decisions away from the camera operator.
11/28/2016 2:46:07 AM •
Pentax...
•
Answered
on Nov 28, 2016
•
121 views
What film does a Pentax Z50P take?
It is designed to use 35 mm film DX coded from 25 through 5000.
Film can be slide film, B&W, and color negative film.
1/5/2016 4:34:04 PM •
Pentax...
•
Answered
on Jan 05, 2016
•
859 views
Nikon d40x exposure problem
I assume that this is a film camera that has light meter.It could be that the camera is set to a different film sensitivity than the actual film.For example, the film is 400 ASA but the camera is set to 100 ASA.The sensitivity rating of the film is written on the film box and on the film cartridge. Make sure you set the film ASA number on the camera too.
10/23/2013 2:30:37 PM •
Pentax...
•
Answered
on Oct 23, 2013
•
94 views
New batteries for sf7 camera
The SF7 uses a 2CR5 or equivalent battery. If you can't find one at a local electronics store, you may order it online
here.
2/17/2012 11:15:09 PM •
Pentax...
•
Answered
on Feb 17, 2012
•
104 views
Recently after putting the film in and taking pics
Probably. Most cameras give you a mark to which you pul out the film leader.
If your cam is one of the power load/wind/rewind models then you must pull the leader right up to the mark
If is one of the older ones with an advance lever, then you can watch the rewind crank to see if it revolves when you wind on. If it does not, then you have not engaged the film in the take-up spool properly.
10/8/2011 4:08:10 AM •
Pentax...
•
Answered
on Oct 08, 2011
•
292 views
What does the E mean
If you go to http://www.pentaximaging.com/support/manuals-and-literature/ you can find the manual for your camera. From my experience the E on a Pentax camera means the film isn't loaded properly. Hope this helps.
5/11/2011 7:09:19 PM •
Pentax...
•
Answered
on May 11, 2011
•
767 views
Not finding what you are looking for?