20 Most Recent
Lakewood HV 18-c Floor / Box Fan - Page 2 Questions & Answers
Fan Blade is hard to turn
Can try a little oil, if you can see the bushings onthe motorHave to remove the fan, to get to the front oneThat will work a couple months, then it's off the the recycle center for the fan
My lakewood HV18 just stopped. Spinning the shaft
I think you need to buy a new fan. Unless this thing cost several hundred dollars it isn't worth rewinding and a capacitor isn't likely to cause it to stop working, the cap is for STARTING it spinning anyway and sometimes they are used to HELP it run better, but it will try to run if you spin it and since your's does nothing, more than likely the windings are gone.
Lakewood HV-18 fan... how to wire switch?
My switch unit also fell apart as I took the back off and I didn't get to see the correct position of the switch. After much trial and error, I found this to be the initial "Off" position (see photo)
I have a HV-20G floor fan, And I have no
In that particular model, there is a small thermo fuse connecting the white wire and the yellow wire(there are 2 yellow wires coming from the capacitor). It's hidden in the coil so you can just cut the wick in that area an pull those two wires and you are going to see the fuse(small square shape one).
Not finding what you are looking for?