20 Most Recent GE JGRP17 Gas Single Oven - Page 8 Questions & Answers

Strange it won't turn back on. Did you see it working when you purchased it secondhand? It appears you just need to reset. Turn off at the breaker for 2 minutes, then back on and try this.

SOLVED: Our GE Profile JTP18 keeps flashing "door loc

Fixya https://www.fixya.com > support > t200245-our_ge_p... 6 answers If the oven is flashing "LOCKED DOOR" on the display. even though the door is open, the fix is easy and there is no need for repair. Press and hold the oven ... https://products.geappliances.com/appliance/gea-support-search-content?contentId=16196 lots more here https://www.google.com/search?q=GE+jtp15+wall+oven+locked+door+flashing%2C+4%3A00+flashing ..

ck here... https://www.justanswer.com/appliance/40xmk-ge-profile-range-oven-bake-probe-lights.html

Question edited for clarity and make some sentences. Question moved form Misc. It sounds like you have a bad temperature sensor. Some can be calibrated, but not by a hundred degrees. https://www.google.com/search?q=ge+jb250df1ww+calibrate+oven+temperature

To find the correct replacement baking element for your GE Rapid Clean II J55BF-1 wall mount oven, you can try the following steps:

1. Locate the model and serial number of your oven. This information is usually found on a label on the inside of the oven door or on the back of the oven.
2. Visit the GE Appliances website or use an online appliance parts retailer to search for the part using your oven model number.
3. Look for the baking element part number in the oven's user manual or service manual. These manuals may be available online or from the manufacturer.
4. If you are still having trouble finding the correct part number, consider contacting the manufacturer's customer service department for assistance.

Once you have the correct part number, you can order the replacement baking element and follow the manufacturer's instructions for installation.

It's possible that a faulty ERC (Electronic Range Control) could damage a new keypad, but it's not very common. The F7 D6 error code indicates a problem with the communication between the keypad and the ERC. Here are a few other things you could try:

1. Check the ribbon cable connection between the keypad and the ERC. Make sure it is securely connected and not damaged in any way.
2. Try resetting the oven by turning off the power to it for a few minutes, then turning it back on. This may help clear any temporary glitches that are causing the error.
3. If the above steps don't work, it's possible that there is a wiring problem or a faulty component in the oven that is causing the error. In this case, it may be best to call a professional appliance repair technician to diagnose and fix the problem.

I'm sorry, I'm having a bit of difficulty understanding your question. Could you please provide more information or clarify what you are asking for? It seems like you may be asking about the thermal fuse on a GE Trivection JT930S oven, but I am not sure what you are asking for after "where is". Thank you.

Even if the oven thermal overload sensor is functioning properly, it is less likely to be the cause of the issue with the oven and top burners not working. However, it is still worth checking to ensure that the sensor is not malfunctioning or damaged. The thermal overload sensor is a safety feature that can cause the oven to shut off if it overheats, so if it is faulty or damaged, it could potentially prevent the oven from heating up or cause it to shut off prematurely. To test the thermal overload sensor, you can use a multimeter to check its resistance. The resistance should increase as the temperature of the oven rises. If the resistance remains the same or is outside the expected range, then the sensor may be faulty and should be replaced. If the sensor appears to be functioning correctly, then you should investigate other potential causes mentioned below, If the oven and top burners are not working even after replacing the main control board, there could be several other possible causes. Here are a few things to check:

1. Check the power supply: Even though the voltage at each input feed wire is 120 volts, the power supply may not be providing enough current to operate the oven and burners. Check the wiring and connections to ensure they are secure and not damaged. You may also want to check the circuit breaker or fuse box to make sure there are no issues with the electrical supply.
2. Check the heating elements: The oven and top burners are powered by heating elements. If one or more of the heating elements are faulty, this could be causing the issue. Check the elements for any signs of damage or wear, and test them with a multimeter to ensure they are functioning properly.
3. Check the wiring harness: The wiring harness connects the various components of the oven to the control board. If the wiring harness is damaged or has a loose connection, this could be preventing the oven and burners from working. Check the wiring harness to ensure it is securely connected and not damaged.
4. Check the safety valve: The safety valve on the oven regulates the flow of gas to the burners. If the safety valve is faulty, it may not be allowing gas to flow to the burners, which could be preventing them from igniting. Check the safety valve to ensure it is functioning correctly.

If you are unable to identify the issue, it may be best to call a qualified technician to diagnose and repair the oven.

You may be able to find a replacement glass for your GE Dual Wave II microwave system by contacting GE's customer service or parts department. They may have compatible replacement parts available, or be able to direct you to a third-party supplier that carries them. You can also try searching for the part online using the model number of your microwave. However, keep in mind that older models may have limited availability of replacement parts, so you may need to consider alternative solutions such as having the glass custom-cut or purchasing a new microwave.

Number one Tip, NEVER use self cleaning cycles. They only exist to break ovens and sell parts. Try disconnecting the mains after about 10 minutes of cool down time. If that doesn't work, you will need a service call to correctly diagnose if the lock solenoid has failed or you need a new control board.

Why You Should (Almost) Never Use Your Oven's Self ...

https://www.thekitchn.com > why-you-should-almost-n... Sep 8, 2022 - Self-cleaning, often with temperatures that go over 1000°, is a particular problem. The elements and the oven just get so hot - much, ...

Why You should Never Run A Self Clean Oven Cycle & A ...

https://www.generalappliancesvc.com > why-you-shoul... Jan 29, 2020 - With an inside temperature exceeding 500° C, and a flash point (the temperature at which items can self-combust without an ignition source) ...

4 Reasons to Stop Using Self-Cleaning Oven Feature ...

https://fixappliances.ca > 4-reasons-stop-using-self-clea... A self-cleaning oven is a feature on many modern ovens that burns off cooking spills and splatters at an extremely high temperature (932 F° or 500 C°) to ... ‎How Self-Cleaning Ovens Work · ‎Major Parts Damage · ‎Family Safety

The thermal fuse in your GE Trivection JT930SOH1 oven is likely located behind the touch screen control panel. In order to access the thermal fuse, you will likely need to remove the control panel. Before attempting to access or repair the thermal fuse, it's important to ensure that the oven is unplugged and that you have taken proper safety precautions, such as wearing gloves and eye protection. Instructions to access the thermal fuse may vary depending on the specific model of your oven, so it's recommended to check the owner's manual for your oven or contact GE for instructions. However, in general, you may be able to access the thermal fuse by first removing the control knobs and screws that secure the control panel in place. Then, you'll likely be able to lift the control panel off of the oven to access the thermal fuse. It's important to note that the thermal fuse is a safety device, and it's designed to blow if the oven overheats. If the thermal fuse is blown, it will need to be replaced. If the fuse is not blown and the touch screen is still not lighting up, it could be a problem with the touch screen itself or a problem with the wiring or other electrical components of the oven. It's recommended to contact a certified technician to diagnose and fix the problem.

Question edited for clarity. One of Broil elements have failed. Often you can visually see the damage, or you can test with a multimeter with the power turned off. Try for continuity. The failed one will be shorting to earth. The other possibility is that an end contact has melted through and is touching the case.

If you are unsure, and especially if you are buying parts that don't work, call for service. Sensors work from the control board, so it may be bad connections or a failed component on it and not the sensor itself. https://www.google.com/search?q=jkp27w0w2ww+parts ...

Looks like you may need a service call. https://www.google.com/search?q=GE+Profile+panel+board+Code+Lin ..

F72 usually means a stuck key on the keypad for a GE oven. Sometimes you can clear the code by turning off the power at the circuit breaker. If the error repeats then you often need to replace the control board. For a parts list, see https://www.searspartsdirect.com/model/3mxf0xig9x-000432/ge-zet1fh1ss-electric-wall-oven-parts . I hope this helps. Cindy Wells

Change it and install newest one

Try checking on Ebay. I seen this one, but i can't answer if it a good match (if it looks close you may be able to patch it in).
https://www.ebay.com/itm/284067140396

Hi, please check that the oven isn't leaking heat into another area. Or maybe your settings need some calibration or the temperature sensor for the oven is off by 60 degrees. If this is the case, changing the temperature setting to 410 should bring the internal temperature to 350 degrees. Please try this. Thank you.

Switch Wiring. Faulty new element. are the most likely causes.

check gas pressure and burner tubes for blockage sounds like its overheating and shutting off

it usually means the touch pad or the oven control is defective.