20 Most Recent GE JKP20 Electric Single Oven - Page 4 Questions & Answers


If its brand new like less than 1 year old, call 1800 GE CARES and have them send out a servicer if you can't locate the solution that seems to work in the user manual. You can also call customer support for questions like this at 1800 626 2000.

GE Ovens | Answered on Jan 24, 2019


The wall oven probably has a bad door lock. If the door is stuck shut, average repair cost ~ 300 dollars - 500 Dollars max. Worth calling service if you lack the confidence or experiece to tackle this expensive machine. If the wall oven door actually opens and isn't locked shut, try holding down the door switches to see if you get a response or if the error clears. Recommend calling GE service for this repair if available in your area. 1800 GE CARES

GE Ovens | Answered on Jan 24, 2019


I will first test the Thermal fuse. Its usually inside the unit situated on top of the oven case. The switches are mechanical and can fool around a bit. i would bridge that to test if it works, then replace it if indeed so. Very inexpensive

GE Ovens | Answered on Jan 22, 2019


SADLY WITHOUT THE ABILITY TO SEE IT , TEST IT WE CAN ONLY SUGGEST YOU CALL A LOCAL REPAIR SERVICE .

GE Ovens | Answered on Jan 20, 2019


Hello, the model number is incorrect, you are missing a 4 or a 3 after the letter F. Based on the model JT5000SF4SS, the problem is the control board that also acts as a display board and touchpad, part number is WB27X25342, you can get it from RepairClinic and return it if it doesn't work.

Regards,
Appliance Repair Brooklyn
https://appliancerepairbrooklynnyc.com/

GE Ovens | Answered on Dec 31, 2018


Hello, Deborah -

I hope I am correct in thinking that you do not have the owner's manual for your oven. If you do have the manual, failure codes are probably listed in the manual, with an explanation of what they mean.

According to information on the list of GE Wall Oven Error Codes provided by Sears PartsDirect:
https://www.searspartsdirect.com/wall-oven-repair/error-codes/ge-wall-oven-error-codes.html
F1 means:
Stuck or defective button on the key panel
The check / repair is:
(Quote)
Push the Clear/OFF pad. Shut off power to the oven, disconnect the flat ribbon connector from the electronic oven control board and then restore electrical power. If the code reappears after about 30 seconds, replace the electronic oven control board. If the code doesn't reappear, replace the key panel.
(End quote)

Best wishes.

GE Ovens | Answered on Dec 21, 2018


DO you have a model number for that. I'm almost sure it's a thermal fuse in the back of the oven. Usually they go out during or after cleaning but that would shut down both elements. If you have the model (usually by the inside door look all over and up in the cavity) Then if you go to this link

http://www.searspartsdirect.com/partsdirect/index.action?intcmp=xsite_Sears

It will show you a breakdown of the oven and where it is. If you give me the model I'll show you what I'm talking about. Good luck.

P.S. if it the fuse it's a cheap fix, little hard to get in back of the oven but cheap!

GE Ovens | Answered on Dec 19, 2018


unplug it from the mains, count to 10 and plug it back in. Self Clean cycles invariably break stoves and burn out elements and door locks.

GE Ovens | Answered on Dec 15, 2018


NO YOU CAN NOT IT IS ALREADY INSULATED AS GOOD AS IT WILL EVER BE .

GE Ovens | Answered on Dec 13, 2018


If it has a thermal fuse, check that. If not, most likely a control board issue

GE Ovens | Answered on Dec 08, 2018


A very simple solution to r epairing all by yourself is getting help from handbooks, they're very detailed and complete in every way so for me it was my best source to repair
one of the to p sites for this is https://big-manuals.com/

GE Ovens | Answered on Dec 07, 2018


I have the same problem. Did you ever find the solution

GE Ovens | Answered on Dec 03, 2018


A 1951 MODEL HUMMM ALMOST AS OLD AS I AM . WERE I YOU I WOULD LOOK FOR A REPLACEMENT UNIT

GE Ovens | Answered on Dec 01, 2018


F2 means your oven is sensing that it’s too hot. Try cutting electrical power to it for 5 minutes. If that doesn’t resolve it, either oven temperature sensor / probe or control board will need replacing

GE Ovens | Answered on Nov 22, 2018

Not finding what you are looking for?
GE JKP20 Electric Single Oven Logo

Popular Tags

28 questions posted

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Ovens

  • GE Ovens

Most Popular Question

oven fan runs but heating element

  • Ovens
Loading...