20 Most Recent GE Profile JT955 Electric Double Oven - Page 9 Questions & Answers

Stuck or defective button on the key panel. Unplug unit, then Try disconnecting ribbon from control to keypad and then connect back.

Electronic control is bad.

online search using make and model

To set the clock on the JB860SJ1SS, press and hold the 9 and 0 keypads simultaneously for 3 seconds (or a bit longer). Then type the current time using the keypad. Press Start to save the current time. This is shown on page 13 of the manual; see item 7 Clock. Sears Parts Direct has the manual available here: https://www.searspartsdirect.com/partsdirect/user-manuals/JB860SJ1SS-GE-ELECTRIC%20RANGE-manual . The direct link to download the manual is currently https://c.searspartsdirect.com/mmh/pd_download/lis_pdf/OWNM/1508037L.pdf . I hope this helps. Cindy Wells

Either bulb is bad or wiring is bad going to light socket or switch controlling it is bad

Call warranty service as anything else may void your warranty.

Look for the problem in 3 places. 1) the element has burned out. 2) The connector where the element is connected to the wiring has failed, or 3) the wiring has burned in two. God bless your efforts.

I do not have specifics to your model...but at times the F5 code with GE ovens means there is an issue somewhere in the sensing circuit which measures the oven temperature. It could be the sensor itself (looks like a thin pencil sticking out from the back of the oven) or it could be in the wiring from the sensor back to the control unit display. Sometimes hitting the CLEAR OFF button helps...also totally depowering the oven via your circuit breaker panel and repowering....but odds are low that will 100% solve it.

Likely an internal fuse

Then you need to replace the keypad assembly or the oven.

They do charge a fortune for parts. Get the part number for the controller and then log it into ebay. Often you can get the parts there for a much better price. Otherwise repair will not be cost effective unless the part is dirt cheap. Yeah, right!

There are some products out that can help with this problem. Check out Easy Off for a good one. But get the correct one some are not for self cleaning ovens. If the protective layer has come off an you see some rust from the steel sides it will never clean. You will need one of the can cleaning products to do the job.

I had a very similar problem with my oven so I contacted www.ovenlettering.co.uk who supplied me with excellent quality replacement decals with super fast delivery! The video on the website made it easy to apply them too