20 Most Recent
GE Profile JT955 Electric Double Oven - Page 6 Questions & Answers
We are getting a F9 code on a GE ZET938 convection wall oven while trying to clean it. What does that code mean?
The wall oven probably has a bad door lock. If the door is stuck shut, average repair cost ~ 300 dollars - 500 Dollars max. Worth calling service if you lack the confidence or experiece to tackle this expensive machine. If the wall oven door actually opens and isn't locked shut, try holding down the door switches to see if you get a response or if the error clears. Recommend calling GE service for this repair if available in your area. 1800 GE CARES
1/24/2019 3:26:43 AM •
GE Ovens
•
Answered
on Jan 24, 2019
What does F-1 MEAN ON HE TRUE TEMP WALL OVEN MEAN?
Hello, Deborah -
I hope I am correct in thinking that you do not have the owner's manual for your oven. If you do have the manual, failure codes are probably listed in the manual, with an explanation of what they mean.
According to information on the list of GE Wall Oven Error Codes provided by Sears PartsDirect:
https://www.searspartsdirect.com/wall-oven-repair/error-codes/ge-wall-oven-error-codes.html
F1 means:
Stuck or defective button on the key panel
The check / repair is:
(Quote)
Push the Clear/OFF pad. Shut off power to the oven, disconnect the flat ribbon connector from the electronic oven control board and then restore electrical power. If the code reappears after about 30 seconds, replace the electronic oven control board. If the code doesn't reappear, replace the key panel.
(End quote)
Best wishes.
12/21/2018 11:36:58 PM •
GE Ovens
•
Answered
on Dec 21, 2018
Elements in convection oven won't heat
DO you have a model number for that. I'm almost sure it's a thermal fuse in the back of the oven. Usually they go out during or after cleaning but that would shut down both elements. If you have the model (usually by the inside door look all over and up in the cavity) Then if you go to this link
http://www.searspartsdirect.com/partsdirect/index.action?intcmp=xsite_Sears
It will show you a breakdown of the oven and where it is. If you give me the model I'll show you what I'm talking about. Good luck.
P.S. if it the fuse it's a cheap fix, little hard to get in back of the oven but cheap!
12/19/2018 7:01:24 PM •
GE Ovens
•
Answered
on Dec 19, 2018
Size of a jkp62g0k3
I just need the dimensions of jkp62g0k3 to replace with new onw
11/2/2018 8:41:25 PM •
GE Ovens
•
Answered
on Nov 02, 2018
I have F2 error on Ge profile electric oven and sometimes after a preheat it shuts off
Generally speaking, F2 fault code indicates the oven exceeded 590 degrees with the door unlocked. This could be caused by a stuck relay on the oven control board or it could be caused by high resistance in the oven temperature sensor probe.
If the element will shut off then the likely failure is the oven temperature sensor probe. The sensor is located inside the oven cavity. It will be protruding from the rear panel in the upper left or upper right corner. The sensor can be removed and replaced from inside the oven cavity
10/30/2018 3:52:07 AM •
GE Ovens
•
Answered
on Oct 30, 2018
Not finding what you are looking for?