20 Most Recent Honeywell HE220A1019 Whole House Humidifier Humidifier - Page 9 Questions & Answers


Hello Which came first the chicken or the egg?The unit will operate perfectly in the supply OR return as I have installed in both.If there is more room & easy service access put it in there.

Honeywell... | Answered on Sep 14, 2010


Check to see if you have a wireless remote that requires a battery, mine when bad and it was the wireless remote to turn on and off from outside.

Honeywell... | Answered on May 20, 2010


The model number of your humidifier will help to answer this accurately, but I believ the stick points upwards on models that starts with HCM -XXX

Honeywell... | Answered on Feb 22, 2010


cigars and people are both in good shape at 65% humidity.

Honeywell... | Answered on Feb 12, 2010


Hi,

Please check the bellow article to verify for any bad installation in page 4.

http://www.airkinglimited.com/airkingca/admin/article_instructions/6000IO.pdf


The major reason for the humidifier furnace not working is due to a bad humidistat, fan switch or float switch--problems that take specialized equipment to diagnose. But before you call in a pro, it's worth your time to test the fan motor and float assembly, since repairing them is something you can handle on your own. Let us know if you were looking of something else.

Thanks for contacting Fixya.com

Honeywell... | Answered on Jan 21, 2010


Hi,
With the remote kit all you need is a small hole to get into the supply duct. That should be possible in most any situation.

The problem you will have if you install it into the return is that the steam could cause corrsion inside the furnace, and or cause problems with the blower motor, from the extra moisture.

If I would chose to install in the return duct I would want at least 6-10 ft. of duct and an elbow before the furnace to assure that the air fully absorbs the steam before it gets to the furnace. I would then monitor the blower compartment to check for moisture building up in there.

If you do not have it here is the manual that shows the prefered installation and how the remote works.

http://customer.honeywell.com/techlit/pdf/PackedLit/69-2286EF.pdf

Heatman101

Honeywell... | Answered on Jan 11, 2010


Returned it for a replacement the motor was broken

Honeywell... | Answered on Jan 02, 2010


Adjust your humidistat to lower humidity level. If you do not have a humidistat, get one and install following mfg guidelines. Home Depot sells one for about $30
Search home depot for H8908B1002

Honeywell... | Answered on Dec 26, 2009


email the schematic to me at buffalonymann@yahoo.com

Honeywell... | Answered on Apr 16, 2009


the most practical solution is install a new evaporative pad every year. But if you would like to squeeze "a little" extra life out of the pad . Try soaking it in a solution of 1 part white vinegar to 2 parts water.

Honeywell... | Answered on Mar 28, 2009


It's the humidity sensor error or the drain line is blocked.

Humidifiers | Answered on Jan 09, 2020


could be 2 reasons.

1. It's the humidity sensor.
2. blocked drain line.

Humidifiers | Answered on Jan 09, 2020


the Number should start with 43-52XX normally it should be on the back plate.

Humidifiers | Answered on Jan 09, 2020

Not finding what you are looking for?
Honeywell HE220A1019 Whole House Humidifier Humidifier Logo

100 questions posted

Ask a Question

Usually answered in minutes!

Top Honeywell Humidifiers Experts

Dennis Webber

Level 3 Expert

958 Answers

Simon Benzekri

Level 1 Expert

21 Answers

jdthefixer

Level 3 Expert

746 Answers

Are you a Honeywell Humidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Honeywell Humidifiers

  • Honeywell Humidifiers

Most Popular Question

water flows humidifier all time even

  • Humidifiers
Loading...