20 Most Recent Trendnet TEW-812DRU AC1750 Dual Band Wireless Router Questions & Answers

I have had this happen to me a few times. Usually it is the video card/driver. By KVM I assume you mean a KVM switch that goes to both computers, so you can switch between them? I have had trouble with them, too, so try putting the VGA straight to the monitor and see.

Call your internet provider. They can get you that information or erase the password so you can change it after you convince them who you are. They are real picky when it comes to divulging information, so don't get upset when they ask a lot of questions.

Wrong or corrupt file. Try downloading the firmware file again.

If you want to reset your wifi so you need to press wifi reset button click on it and hold about 20 seconds.

You need to download the user guide from here TRENDnet Support Basically 1. Make the computer or network device (for which you are establishing a DMZ link) has a static IP address (or you can use the DHCP reservation feature to ensure the device has a fixed IP address) (see "Set up DHCP reservation" on page 29). A. Signing up for a Dynamic DNS service (outlined in the DDNS section) will provide identification of the router's network from the Internet. 2. Log into your router management page (see "Access your router management page" on page 22). 3. Click on Access, and click on Firewall & DMZ. 4. Next to DMZ Enable, click Enabled. 5. Next to DMZ Host IP, enter the IP address you assigned to the computer or network device to expose to the Internet. 6. To save changes, click Save Settings.

Need a dot between 0 and 1 then enter admin admin in both boxes if not that then admin password .google the default password for you router if you still have problems.they are listed.