20 Most Recent Kenwood KM300 Chef Stand Mixer - Page 3 Questions & Answers

Here's how to fix the stuck implement problem:The implements each have adjustable heights. to adjust the height you need to loosen the bolt at the top with a 14mm spanner. If the bolt was loose when it was being used then it can get too short and not leave enough clearance between the bolt and the machine in order to push up and turn to release the implement. If this happens take the open ended spanner, grasp the implement and rotate the spanner clockwise (when looking up at the machine from below. Once the nut is loose rotate the implement until there is enough clearance to remove it normally.

Hi Eward: This information is not always readilly available online. Suggest you contact Customer Support for Kenwood and inquire if they are able to make this information available.Go to the Customer Support site:http://www.kenwoodworld.com/uk/Customer-Service/If necesary you the link to 'global site' to select your country and then scroll down and send an e-mail request to the contact name provided near the bottom of the page. Thank you for using FixYa!

First of all, thank you very much for choosing FIXYA today for your technical support needs. Here is a direct link to the ONLINE USER'S MANUAL for that model:http://www.kenwoodworld.com/Global/Instruction%20books%20(User%20manuals)/Food%20Mixers/88249iss5%20KM300,%20KM400,%20KM800%20English%20only.pdf To view the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and blue highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the Owner's Manual. You may need ADOBE READER installed on your computer to read PDF documents, although many computers already have this type of utility pre-installed. You can download this free at WWW.ADOBE.COM if necessary. Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, then follow the onscreen instructions to install the software on your computer. I truly hope that was helpful to you. Good luck and take care. Joe.

HI.The thread to where tghe nut is attached might been loose.You can actually have it repaired by putting adhesive.Before you tight the screw put adhesive to the thread and tight the nut slowly.In this way the nut will be permanently engaged/fix and it will not easily loosen when the paddle moves.The other way is to replace the thread and nut as well.Thankyou for choosing FIXYA.

I live in the US and have an old Kenwood KM230 Mixer that I absolutely love. Unfortunately I can not locate a replacement for the spashguard that has now cracked. The old splashguard item # 27215/31227 is the replacement spashguard....any solutions