Top 20 Kenwood KM305 Stand Mixer - Page 4 Questions & Answers

The bowl sits on a round plate. If the bowl cannot sit properly, moce the round base a notch on the right to give more bowl space.

I don't know how much gear oil nor what type of gear oil. But most likely anywhere you can get a-hold of gear oil... use what you can get. I would try restaurant supplies. In my city there is a place called Case & Drum that sells anything from the petroleum industry.

follow the book. You may otherwise overload and burn motor.

go to http://www.ciao.co.uk/Kenwood_KM_336_Classic_CHEF__6732719ask them about your part.God bless you

Hi Mikey. No, I don't have the manual but email me at [email protected] if you have any specific questions. I repair quiet a few of these.

If by catchpin you mean the pin that locks down the head assembly then they are obsolete. Get it welded or braized up and carefully file it back to shape. If you only get it repaired where it is worn then you can follow the shape of the unworn part. When they are really bad sometimes the curved bracket it passes through needs welding as well.

try google?

Send me your email, I will send you some infoRegards

You need to call the manufacturer on this, we do not have the information and can't supply parts.

try going to the support section on there website it should have quite a few documents including the instruction manual

Hi, you need to put a large screwdriver into the front port, then undo the clutch dog

The switch on the titanium has a flimsy week point and is always breaking. This is a stupid economy by Kenwood when there is now so much good competition. Mine broke after only 6 months and Kenwood were less than helpful suggesting I took back to where I bought it - 500 miles away!! I wish I had bought a Kitchen Aid

Hi, I can help you also and send you a complete pdf file of the original service manual. Please send me your email.

This will cost 2.95 GBPhttp://www.belstar-electrics.co.uk/products/Kenwood-FP101-User-Manual.htmlor register free at http://kitchen.manualsonline.com/support/kenwood/blender/please-help-find-the-manual-for-this-kenwood-food-processor-11218

Find it on http://www.espares.co.uk/datastore/ProductManuals/1135674.pdf

The blades inside are a left hand thread, so unscrew the nut holding the blades anti-clockwise.

This is the only thing I could find in order for you to get parts...This is their phone number in UK..Kenwood Spares Distribution Centre on 0870 241 3653 If I uncover anything else I'll let you know...

Hi, send me your email and I will send you a wiring diagram, also I can tell you where to get a cheap good quality repair kit

I have tried to find a service manual but have not has any luck, I have included a link below to a company that may be able to help.Link:

Not likely to be fixed because of no parts, buy a modern one. The gears are shot and it may wind up shocking you.