20 Most Recent Kenwood KM800 Major Classic Stand Mixer - Page 8 Questions & Answers

no, you cannot adapt A700 to A900 because the level of the body where fit the motor is different.

Regards
Kenwood Chef Restore

Hello. your Kenwood Major is A707 ?

the new attachment for front and high speed outlet, not fit in A701/707 ..

Please visit our web site Kenwood Chef Restore in download section. you can download the compatibility of attachments
Regards

Please tell what happen with your Kenwood maybe can help from here .
or call this people

Kenwood Home Appliances (Pty) Ltd
1295 Clubhouse Street
Maraisburg 1709
South Africa
+27 (11) 4740153
Regards
Kenwood Chef Restore

What model is your Kenwood ? to Kamalsalman

A901 models change triac and capacitor .. or centrifugal broken

also check if another's components is faulty.

Kenwood Chef Restore

New bushes!

there is a kit on ebay for both 701 and 901 kenwoods requires use of soldering iron do a search for Kenwood motor repair it is unlikely to be the motor usually the speed contoller components

Found a kit on ebay for 9.99 which fixes the speed cntrol problem on 901 chefs do a search for kenwood motor repair comes with instructions you would need to be ok with a soldering iron

could proberly fix it you would have to pst it to us we are authorised KW repairers.

Hi, maybe your circuit its not burning, in theses models its normally the capacitor or triac, resistor as well,
with just change thats components the machine working again

regards
Kenwood Chef Restore

possible carbon brushes or speed control,have you checked fuse and cable?

the selector switch is bad , needs to be replaced

Yes! we can supply this part£ 15.00 + p&p shaft size 14mm,If yours is differant size it would be new gearbox.(vertical drive shaft)

This part is avaliable from us £68.00 +p&p

Try turning the beater in the reverse direction to the direction it normally turns - clockwise looking at the beater (I think), this should make the shaft pins ride up on some cams which should release the beater.

posibly carbon brushes in motor.we can supply.

have you checked basics ,fuse .cable etc,more info req

The resistor will have failed. The A701 replacement is a 450 ohm 15W or 20W wirewound resistor. The capaicitor also can fail if the resistor has gone. It is a mains capacitor 0.1 microfarad. The modern mains capacitors are better to use than the old electrolytic type that were originally in the mixer.

can you elaborate on the the disk and electrics .
Is this anything to do with the green button that i can see ?

Mixer has failed PAT Test due to worn main power lead .Want to know where I can buy a replacement lead near to Burton on Trent
Mixer is Kenwood Major Classic KM800