20 Most Recent Brother DCP-135C Flatbed Digital MFC All-In-One InkJet Printer - Page 2 Questions & Answers

the proper reset code sequence to reset DCP printers without numeric keypad should be as follows:

1. press buttons OK, Menu, Mono Start one by one, followed by up arrow key four times. this should all be done as short a time as possible, around 3 seconds.

2. enter maintenance mode 80 by pressing the up/down arrow key and set key to select numbers 8 and 0

3. press blue MONO start button to select PURGE which requires it to be pressed a number of times before PURGE appears on the LCD screen of the printer

4. then use the up'down key and OK button to enter the reset code 2, 7, 8 and 3 keys to reset the counter : Note this does not overwrite the number next to PURGE on the LCD screen but once the last number is added it gets reset to 0000

5. press Stop/Exit key to go to root of maintenance mode

6. enter 9,9 to exit maintenance mode

Silly as it sounds, you may need to but a printer cable; they are universal to most printers and a little too expensive if you ask me. Manufacturers knock 10 dollars off the top cost of the printer you buy only for you to spend another 20 buying this cable, my advice is to ask people you know with printers if the have any extra cables around; people don't usually throw those away.

The flaw in your printer is mechanical, I suggest you take it with a technician.Well, first, find out if there is nothing stuck or broken at a glance

You candownload the Brother printer drivers from their support WEB site. Please clickon this link and select your model printer to download : -http://www.brother.com.au/ProductsSolutions.aspx

1 years?
Means still under warranty for print head. maybe print head faulty. Better send to Brother.

Hi,

You can download the installation driver and software from manufacturer's website by clicking this link


On the page which opens:

• Select the operating system of your computer (Windows XP/ Vista..) from the drop-down list
• Select the Language (English) and click the Search button
• Download and install the drivers and software from the next page which opens.

Hope this solves your problem. Thanks for using FixYa.

see the printer is connected to the computer, printer is powered on, & the document u want to scan is layed upside down in scanner. then open "paint" software & go to "from scanner or camera". follow the instructions on screen & finally save the image in required format which u will see in save window bottom side (drop down menu).

No necessary at all.

To install the Brother printer drivers if you do not have the disc, read the information from this link.

http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=dcp130c_all
download at link above

You candownload the Brother printer drivers from their support WEB site. Please clickon this link and select your model printer to download :- http://www.brother.com.au/ProductsSolutions.aspx

http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=dcp130c_all
here is the support site for this printer ...(the 130C series ) ..just select the operation system in use ..and download the driver ...and run it after that ..
Good luck and have a nice day !..

Ink absorber tank is full. You will need to have it replaced or enter service mode and reset the count (not really a good idea as it will overflow)