eMachines E19T5W 19" Monitor - Page 6 - Answered Questions & Fixed issues


Once black "highlighted" press enter.Options to enable or disable will appear.

eMachines... | Answered on Aug 31, 2014 | 38 views


Apparently, The motherboard for the t2984 is a SEABREEZE T3 according to the eMachines Parts Depot...
http://hardforum.com/showthread.php?t=1089862

eMachines... | Answered on Aug 30, 2014 | 34 views


1. Password incorect- try to key in another one.
2. Caps Lock is ON or OFF. Try to remember is there any CAPITAL letters involved.
3. For God's sake stop spying on your fiance, and leave her(his) computer alone! :D

eMachines... | Answered on Aug 17, 2014 | 33 views


try not calling people who may help you idiots, you're not likely to get any meaningful help from strangers by being rude. And change from AOL. your kids are right. use gmail instead. If you really want password help regarding AOL email you need to contact the only people who can help - AOL. try 1-800-827-6364 for USA or 0844 499 5555 for UK

eMachines... | Answered on Aug 15, 2014 | 53 views


Which power button is flickering (your computer, or your monitor).
Here's some tricks I would try...
1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.
Good luck.

eMachines... | Answered on Aug 04, 2014 | 93 views


Check all connections.
Here's some tricks I would try...
1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.

Good luck.

eMachines... | Answered on Jul 30, 2014 | 80 views


reformat your hard drive and put a fresh copy of windows on it is easiest to do

eMachines... | Answered on Jul 16, 2014 | 26 views


the function key should have Fn on it or something of the like to identify it as the function key

eMachines... | Answered on Jul 07, 2014 | 55 views


either a bad power switch or your power supply is bad I would think the later is the problem

eMachines... | Answered on Jul 01, 2014 | 32 views


you should be able to go to control panel/audio or sound and find your output device and unmute it that way

eMachines... | Answered on Jul 01, 2014 | 56 views


yes you can upgrade the graphics card, you have integrated graphics but you can purchase a PCI-E graphics card and bypass the on board graphics but keep in mind you'll have to buy a "low profile" graphics card as there's not much room in your case and a full size card will not fit.

eMachines... | Answered on Jul 01, 2014 | 122 views


To resolve this problem, replace the missing or corrupted Ntfs.sys file:
  1. Use the Windows XP startup disks or the Windows XP CD to restart your computer.
  2. When the "Welcome to Setup" screen appears, press R to select the To repair a Windows XP installation using Recovery Console, press R option.
  3. Type the number of the Windows installation that you want to access from the Recovery Console, and then press ENTER.
  4. Type the administrator password when you are prompted, and then press ENTER. If no administrator password exists, just press ENTER.
  5. At the command prompt, type the following commands (press ENTER after each command):
  6. --->cd \windows\system32\drivers
    --->ren ntfs.sys ntfs.old
    Note This step renames the corrupted Ntfs.sys file to Ntfs.old. If the Ntfs.sys file is not found, the file is missing.
  7. At the command prompt, type the following command, and then press ENTER:copy cd:\i386\ntfs.sys drive:\windows\system32\drivers
    Where cd is the drive letter for the CD-ROM drive that contains the Windows XP CD, and drive is the drive where you installed Windows XP.
  8. Remove the Windows XP CD from your CD-ROM drive, type quit at a command prompt, and then press ENTER to quit the Recovery Console.
  9. Restart the computer.

eMachines... | Answered on May 30, 2014 | 109 views


You Need To open The CPU(Or tower) to acces the motherboard, the you need to find the CMOS jumper and switch it one spot over the CLR or clear, that will clear the password. If that don't work remove the battery on the motherboard for few seconds then reinstall it. Good luck. 713aa25d-65db-4817-b04a-35f7ab69b846.jpg

eMachines... | Answered on May 18, 2014 | 46 views


Just go to the eMachines website , select support, download drivers, select you pc model and find the audio driver. Download it, install it and reboot. Or on Windows find Device Manager, find Audio, Video controllers it should be something with a yellow question mark, right click on in then click on update driver, wait until driver is found.

eMachines... | Answered on May 18, 2014 | 25 views


You need to install the system drivers for your specific model.

eMachines... | Answered on May 16, 2014 | 26 views


check the VGA cable from Screen side and pc side or check the power cable. could be lose from back to screen.

eMachines... | Answered on May 14, 2014 | 83 views


Ok. So that is the model. What is the problem?

eMachines... | Answered on May 05, 2014 | 34 views

Not finding what you are looking for?
eMachines E19T5W 19" Monitor Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...