20 Most Recent eMachines eMD620-5133 Notebook - Page 5 Questions & Answers

To reboot to factory setting you need to have the restore disk from the computer, put it in the drive and restart with the cd in the drive, if the startup screen does not start right away you need to type f11 or f6 to change startup order to cd first the the restore screen will startup and click restore factory settings

Get a windows password recovery tool,which can easily bypass windows password if you just forgot windows password.

Hi. I would suggest that you powerdrain your computer might fix this. To powerdrain your computer you must remove first the battery and unplug the ac adapter then press and hold the power button for 20 seconds, after that you must place back the battery and plugin the ac adapter then turn on your computer. If this doesnt work try to powerdrain again the laptop then just use the ac adapter to turn on your computer and that is without the battery. Hope this helps.

Restart the computer:

When it starts to load, watch at the bottom of the screen for two F commands:

You'll have to look quick, cause they don't stay up long, and you may need to restart to see both of them.

Once you have located and determined which will enter setup, hit that F command to go into setup.

Once in setup, you'll see a File Menu.

Scroll to the menu that allows you to change the password.

To change it (since you don't know or can't remember the old one) simply hit enter in this field. If you want a new one, type in the desired password and (write it down) and hit enter. If you don't want a password, simply hit enter and it will enter blank as no password.(not the word "blank"), it will just be set for NO password.

Once you have successfully changed (cancelled out) the password, scroll over ot the Exit Menu list, and scroll down to "save and exit".

This will exit setup and your OS should resume to open. If it prompts for a password, simply hit enter, and it should load into the OS.

If it does not, restart the computer, as it may not have saved the new setting just yet.

Please let me know if you need any further assistance.

carsandcomps,

Guru, Premium Expert @ Fixya.com

The power jack is located on the motherboard. It is soldered to it. You have to remove the screws behind the laptop securing the back cover and disconnect the hard drive and GPU cables remove the keyboard so that you can pull out the motherboard. This is necessary since the solder joints are located under the motherboard and the jack is over it. There are 3 pins that are soldered. Remove the solder on all 3 and pull out the jack. Insert the pins of the new jack in the space vacated by the old pins and use a low diameter solder(2mm or less if available and lead free solder only) to solder the pins to the board and voila!

From what I understand you are now using a new version of Internet explorer or Firefox or chrome browser, all of which use something called tabbed browsing. These browsers open multiple pages in one window as tabs. (Earlier versions of Internet explorer used to open each pages individually, and using the close button will only close that particular window). In tabbed browser each tabs can be closed. If you try to use the close button on the top right hand corner, it will ask whether you want to close all the tabs and close all tabs if answered in affirmative. To close individual tabs click on that particular tab and you will see a small X on the right hand side of that tab. Use it and only one tab will be closed.

You must take in to approved eMachines, agent and pay money, a Fee, then they will give you a "Code" you you enter into the PC, and it will unlock it, this is an anti-theft feature. you also, .MUST provide proof of ownership, a receipt etc, before they will do this however. The "Code" is in NVR,and is impossible, to hack, crack, or otherwise bypass.

1. Click Start
   , type regedit in the Start Search box, and then click regedit in the Programs list.
   If you are prompted for an administrator password or confirmation, type your password, or click Continue.
2. Locate, and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}Caution There can be many instances of the registry subkey that is mentioned in step 2. You must make sure that you are in the appropriate registry subkey before modifying the UpperFilters and the LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the Default data value is DVD/CD-ROM and the Class data value is CDROM.
3. In the right pane, right-click UpperFilters, and then click Delete.
4. Click Yes to confirm the removal of the UpperFilters registry entry.
5. In the right pane, right-click LowerFilters, and then click Delete.
6. Click Yes to confirm the removal of the LowerFilters registry entry.
7. Exit Registry Editor, and then restart the computer

The Microsoft virtual wifi miniport adapter is a new feature in Windows 7, Wireless Hosted Network:

About the Wireless Hosted Network

This device is just a virtual device and it should not affect connecting the wireless network with the physical wireless adapter.

Hence, I’d suggest you to uninstall and re-install only the wireless network adapter drivers from Device manager and check if that fixes the issue.

Before uninstalling the drivers from the device manager, make sure you have a backup of the installation files.

It’s a good idea to create a restore point before uninstalling the drivers. A restore point is a representation of a stored state of your computer's system files. You can use a restore point to restore your computer's system files to an earlier point in time. Restore points are automatically created by System Restore weekly and when System Restore detects the beginning of a change to your computer, such as when you install a program or a driver.


Create a restore point
http://windows.microsoft.com/en-US/windows7/Create-a-restore-point

Visit the manufacturer’s website, download the latest wireless drivers and save it on your hard disk.

To uninstall the wireless connection from Device Manager,

1. Click Start, type Device Manager in the Start search box and hit Enter.
2. Locate Network adapters and expand the same.
3. Select the wireless connection, right-click and select Uninstall.
4. Restart the computer, if prompted.

Drivers should get installed automatically after restarting the computer.

Now, you may install the latest wireless drivers and check if that fixes the issue.

Hope this helps

In order to refresh a netbook you will have to use a USB key or an external USB DVD ROM to run windows and restore the system. If you still have all of the original software on the laptop you should be able to go to Start>>Control Panel>>Backup and Restore and click Create System Restore Disk. You can then create CDs that can be used to restore your system. You can also copy windows files from a DVD or ISO file to a USB thumbdrive and install windows again from scratch by booting to it. I will be posting a how to on how to do this in detail.

Good Luck,

NOLA Tech

please click this link for your product full specifications. If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Install a FREE antivirus from here:

http://www.avast.com/free-antivirus-download

do u mean it broke by accident? if yes then u can get a new usb 2.0 port installed, this involves opening the laptop, so i recommend that u get it done by a professional

Start / control panel / add/remove programs.

Need permission from the company administrator. Would be surprised if they allow it.

Unfortunately the IP address can easily be renewed, and assigned a new number.

I think your touchpad works fine , maybe it is disabled .
to enabled press Fn button + F9

you could use this help.
Regards