Emerson LC320EM9 32 in. LCD HDTV - Page 4 - Answered Questions & Fixed issues

0helpful
1answer

Tv isnt showing the top part of my game

check screen settings like zoom
1/5/2014 12:17:06 PM • Emerson LC320EM9... • Answered on Jan 05, 2014 • 28 views
0helpful
1answer

Emerson lf320EM4 remote suddenly not working

Check the remote for its infrared emission. If found OK, check and replace the infrared sensor inside the TV. If you wish to get some details, http://electronicshelponline.blogspot.com/Pull up older posts.
12/22/2013 9:41:50 AM • Emerson LC320EM9... • Answered on Dec 22, 2013 • 176 views
0helpful
2answers

How do I install 1EMN20039B

If you wish to get these details, you have to download the repair manual to this set. The disassamebly section of it will have details. If you wish to get some details, http://electronicshelponline.blogspot.com/ Pull up older posts.
12/14/2013 5:07:22 AM • Emerson LC320EM9... • Answered on Dec 14, 2013 • 89 views
0helpful
1answer

Tv wont get channel signal

1- Have you tried a different input cable?
2- maybe try using the set top box tuner?
3- check the input setting on TV?
Good luck
12/11/2013 4:08:29 PM • Emerson LC320EM9... • Answered on Dec 11, 2013 • 173 views
0helpful
1answer

The text along the sides of the tv screen are not completely in view

you need to change the 'zoom' on the tv by the remote. Normal mode frames the 4:3 video to the 16:9 picture area by displaying it in its original aspect ratio, with vertical gray or black bars on both sides of the screen. The disadvantage of this method is the fact that the image is small by virtue of not using the entire width of the screen. This is also known as the 4:3 mode. Full mode Full mode horizontally stretches the 4:3 video evenly across the entire width of the screen. This is the proper mode to display anamorphic video. If used for standard aspect ratio video, everything on the screen will appear wider than normal. Contrast this with anamorphic video displayed without processing on a 4:3 display, in which people on the screen will appear taller than normal. This is also known as the 16:9 mode. Zoom mode Zoom mode evenly stretches the picture both horizontally and vertically, until the picture fills the entire width of the screen. This crops out the top and bottom of the picture. This mode is used for letterboxed and open matte video. 14:9 mode Main article: 14:9 In 14:9 mode, the picture is magnified more than in Normal mode, but less than in Zoom mode, while retaining the original aspect ratio. Wide Zoom mode Wide Zoom mode, also called Just mode, Horizon, or Smart Stretch, progressively stretches the picture horizontally, less in the middle and more on the edges. This allows normal aspect ratio video to be displayed across the entire width of the screen, with minimal cropping, and with much less of the unpleasing visual stretching effect of Full mode.
12/9/2013 9:38:04 PM • Emerson LC320EM9... • Answered on Dec 09, 2013 • 625 views
0helpful
1answer

Emerson TV picture to big for screen cutting off picture

sounds like its zoomed in, have you tried playing with the zoom button?
12/1/2013 4:08:21 AM • Emerson LC320EM9... • Answered on Dec 01, 2013 • 2,465 views
0helpful
1answer

I got a Emerson 50" on Black Friday! Wii on component input has no red in the picture.

Try another component video cable. It sounds like the red signal isn't getting to the TV.
11/29/2013 11:06:00 PM • Emerson LC320EM9... • Answered on Nov 29, 2013 • 645 views
0helpful
1answer

Need help with connecting PC to tv

You will have to find what the native resolution is on your monitor. Then you will have to go into your computer control panel under display and change your resolution to match the monitor.
11/18/2013 1:47:58 AM • Emerson LC320EM9... • Answered on Nov 18, 2013 • 75 views
0helpful
1answer

When I try to plug my PC into my emerson TV

check if your pc resolution or display needs to be changed.
11/4/2013 8:19:59 AM • Emerson LC320EM9... • Answered on Nov 04, 2013 • 414 views
0helpful
1answer

Lc320em2f wil not turn on light blinks twice

Two blinks of stand by light indicates a fault to its back-light system. If you wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Flip card, can be selected by the drop-down list, by the top left of the display window, will make surf easy. You can also do a search, by type in the brand name / model number / IC used, in the search box at the top right of the display window. Blinking codes to many brand TVs are given.
11/3/2013 10:08:01 AM • Emerson LC320EM9... • Answered on Nov 03, 2013 • 141 views
0helpful
1answer

No signal,when connected to cable

Make sure you have the input set correctly in the set up mode.
10/30/2013 5:04:33 PM • Emerson LC320EM9... • Answered on Oct 30, 2013 • 24 views
0helpful
1answer

How do i get sound when using my emerson

If you done't have a separate audio input, you can't. Some TV's that can be used for monitors have a separate audio jack just for that purpose. If it doesn't, then you will have to get a separare set of speakers and use them or a headset direct to the computer.
10/23/2013 6:02:54 PM • Emerson LC320EM9... • Answered on Oct 23, 2013 • 158 views
0helpful
1answer

Cannot get the DVD screen to close. Got the DVD

I would recommend powering off the dvd player and unplugging it. If the screen persists then the issue might be with the tv or the screen itself. Could be a simple setting. If that doesn't work, message me back with more details and I will see what I can do for you.
9/28/2013 9:36:48 PM • Emerson LC320EM9... • Answered on Sep 28, 2013 • 25 views
0helpful
1answer

Half screen

T'Con board fault.
9/23/2013 5:49:48 PM • Emerson LC320EM9... • Answered on Sep 23, 2013 • 86 views
0helpful
1answer

Format how to watch movies useing usb

usually FAT32 works with most equipment. its ok for 4gb movie files. 4gb per movie or under.
9/17/2013 5:50:44 AM • Emerson LC320EM9... • Answered on Sep 17, 2013 • 71 views
0helpful
1answer

Turns off

If the back-light inverter has any problem, this type of fault can occur. Check it.http://electronicshelponline.blogspot.com/ If you wish to get more details about this kind of fault to LCD TVs, check this link.
6/14/2013 1:26:55 PM • Emerson LC320EM9... • Answered on Jun 14, 2013 • 30 views
0helpful
2answers

I have a 32 inchemerson tv, model number LC320EM1.

If standby is on, the unit thinks that no signal is being sent to the unit, verify a valid source and try other inputs.....
5/18/2013 5:47:13 AM • Emerson LC320EM9... • Answered on May 18, 2013 • 865 views
0helpful
1answer

Connect pc

Refer its user manual for details.
5/12/2013 6:11:47 PM • Emerson LC320EM9... • Answered on May 12, 2013 • 23 views
0helpful
1answer

Sansui sv

Flashing of standby light indicates the fault. From the number of blinks that occurs at one time switch on, you can get an idea about the faulty circuit section inside. The blinks are called blinking codes. If you wish to get more details, surf the following link. There are over two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help. You can get a solution there. More than Nine Lakh viewers cannot be wrong. Blinking codes to many brand TVs are give in detail. Pull up older posts there.http://electronicshelponline.blogspot.com/
5/6/2013 1:04:48 PM • Emerson LC320EM9... • Answered on May 06, 2013 • 139 views
0helpful
1answer

My emerson lcd tv wont come on it worked fine yesterday but when i go to turn it on today the green light blinked twice than red once but never came on

If you wish to get more details, check this site linked below. Pull up older posts there. Check the site with patience, as it has over 2350 posts now. All are related to electronic equipment repair help. If you search the site in Timeslide option, which can be selected from the drop down list at the top left of the display window, it will be easy to locate the related post. You can also do a search by type in the brand name to your device into its search box at the top right of display window. Blinking codes to many brand TVs are described in detail. http://electronicshelponline.blogspot.com/
4/29/2013 7:36:28 PM • Emerson LC320EM9... • Answered on Apr 29, 2013 • 319 views
Not finding what you are looking for?
Emerson LC320EM9 32 in. LCD HDTV Logo

654 questions posted

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...