Top 20 Sharp Aquos LC-C3234U 32 in. LCD TV Questions & Answers

You should press the prog: button < / > to change the channels stored in each program. The number of press will depend upon which program do you wish to see. It will be best to buy a remote control for this set, as this set will not have a Menu button on its front panel, as there is only four buttons on panel, as you indicates here. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ If you see these sites by "MOSAIC" or "Magazine" view will make surf easier. Or type in the brand name of your device in the search box, and press "Enter". Universal remote controls are available at most of the electronic spare part selling shops.

Check and replace damaged component/s at its backlight inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. Do a search by type in the brand name of your device at its search box. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/

CCFL backlight lamps for LCD back light repairs of monitors and laptops...

If you wish to buy its original remote control, contact the authorized service center, or authorized dealer to your device brand. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its user manual. Never accept a remote control, that hasn't both of this. If you see the site by "MOSAIC" view, will make surf easier. http://electrohelponline.blogspot.com/

Check its back-light inverter. Check the voltage that comes to it from the main power regulator board, and main digital board. To get some details, http://electronicshelponline.blogspot.com/Pull up older posts.

To do a factory reset, you have to enter its service mode option. If you wish to get more details about this, check this link. http://electronicshelponline.blogspot.com/ Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

These blinks are fault indications. Count the number of blinks occurs at one time switch on, and check this link for details. The link contains the blinking codes to many brand TVs.

please when I plug the TV the relay click continuously

Though this could certainly be due to some defects inside, just try the following: Look for any loose contacts in power outlet. Try changing the input device to some other like a DVD player and see. If problem persists, I suggest it is better to refer it to a qualified service technician, since the back cover has to be opened for investigation.

Sometimes it will work and sometimes it will not work

Looks like a defect inside the TV. Ensure there are no loose contacts in power outlet and try changing the input device to some other and see. If problem persists, I suggest it is better to refer it to a qualified service technician, since the back cover has to be opened for investigation.

Make, model?

Make sure you connected all the plug wires in tight and the pc flat ribbon wires to the top of the lcd panel (which has a flip up connection on the lcd plug side that has to be pulled up with your thumb nail and hold the ribbon wire in all the way as you push the connection down to connect it.) When you power the tv on look at each ccfl lamp and see if one is dim or not as bright or has a pink color to it. I had a second lamp on my tv that was bad and had a pink color but lite up and it kicked the power off like your tv is doing. After I replaced it the tv worked find. For some reason these tv`s will get a bad ccfl lamp from time to time. You might buy another ccfl lamp and remove each lamp one at a time and put the new lamp in it starting at the top and going down checking all 10 lamps one at a time this way you will find the bad one. If the tv still will not power on then I would replace the power supply board and the tv should work then. If you need to buy the power supply board go to partsstore.com and put your model # in the search to get the part #. If you need help finding the part # let me know and I will try to help you fine it. After you find the part # you might find a good or new power supply board on Ebay.com at a lower cost. I bought a spare new power supply board on Ebay.com for near nothing for my tv.

Try to check the main line and if its ok proceed to the power chord then to transformer or the fuse and you look it they are fine look for a technician to check your tv.Choose a better technician near from your place.

You don't want to keep doing that because you can make it go into a coma and not turn back on again. It may not work to perform a factory reset INIT (industry initialization) but call sharp aquos 877-322-7867 (87seeaquos) to get a case file created and be walked through an INIT including resetting the lamp errors. If the rep has you read the number of lamp errors and it is not zero then you should be scrolling down and resetting them to zero before changing screens to turn INIT on.

CHECK your power source you may have no power going around ?????

Hello,

power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Good luck in solving the problem....

Hi,

You can download and print the service manual for Sharp LC-C3234U in PDF format from this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Thanks for using FixYa

U mean the manual buttons on the tv itself?Yes,than the tv maunual controls function board is shorted and dead.Tries websites like Shopjimmy.com,Ebay.com to buy a manual controls buttons board for the replacement.

Based on the model number and type of remote control being used you can locate the code numbers for Sharp televisions. If you have tried all of those that came with the remote you can look up additional 3 or 4 digit codes (depends on whether or not the remote utilizes 3 or 4 digit codes) online.