20 Most Recent iLO IWT3206 TV - Page 2 Questions & Answers

On the original TV remote press the "AUDIO" button until it gets to the option "MAIN" and this should get the stereo sound back.

Good luck...

The iLo IWT3206 TV provides two built-in -- or integrated -- TV tuners: a National Television System Committee (NTSC) tuner and an Advanced Television Systems Committee (ATSC) tuner. While the NTSC tuner allows iLo IWT3206-viewers to receive analog, free-to-air TV broadcasts, the ATSC tuner allows viewers to receive digital TV broadcasts via a cable or satellite provider.The benefit of having an integrated ATSC tuner is that it negates the need for a separate cable box or satellite receiver, which can take up space.

There something high voltage arching out from your flyback transformer,,try to check the high tension wire running to the crt tube...thanks..Dods

U have to buy and adapter tha will conect to ur cront rca jax

083,081,094,039,022 are the codes to check. If you wish to get more details, check the links given below. Setup code list and setup proceedings to many popular brand remote controls are given. Pull up older posts there. More than Nine Lakh viewers cannot be wrong. link-1, link-2

SEE IF THE REMOTE HAS AN INPUT BUTTON OR TV/VIDEO

If all the buttons except on off do not work read the owner manual carefully as the set may have a Keyboard lock out feature, on/off also could be affected depending on model.

If a regular set this is a vertical circuit problem---either a filter cap (called feedback cap) or the vertical output chip.

Blinking red light indicates some fault to its main board. Contact any experienced service technician.

The picture height to your TV is too high. Check whether Zoom action is On or not. If it is ON, make it OFF.

the troubleshooting from TV is split in 4 way a)Raster b) Video c) Audio d) Synchro.Now you have Sinchro problem:see the block has dive synchr vertical+synchr horizontal this signal goes to the CRT.IN short tracking the signal.see the block d.

The GE universal remote #24914 works to change your Ilo tv from analog to digital and switch to vid1 or vid2 ect.... The code is in the book that comes with the remote. I use this remote myself. This remote can be bought at Target for under $10.

press the menu button at the tv panel and then select preset then select color adjustment. you can use the channel up/down button to select preset menu and then to make an adjustment you can use the volume up/down button.

Some sets in this size range will not format the picture in HD at full screen but only 4x3 or letter box format.Google the model number with "specs" or consult the owner manual to see what the set is designed for.

most sets have a source or input button on front, side, or in main menu--if not you are out of luck unless have the original remote control--forget a universal.