how to set the clock at a tel. panasonic kx-T7730
Posted by harishomen... on
Basically, there are 2 ways of programming the date
and time - the short way and the long way.
If you are using the KX-T7730 phone on a Panasonic
KX-Txx 308/824 system:
From the Switcboard / Main telephone
( ext 101, 10 or 9 ) with the handset on the
1. Press PROGRAM 0
2. Enter Date and Time
( The format is: yymmdd,
1 to 7 1=Monday 2=Tuesday etc, hh:mm,
0 or 1 0=AM 1=PM ) see example
3. Press AUTO DIAL / STORE to save your changes
4. Press PROGRAM to exit program mode
If the date and time is 3 February 2010 Tuesday 2:15 pm you will enter as follows:
100203 2 02:15 1
From the Switcboard / Main telephone ( ext 101, 10 or 9 ) with the handset on the cradle/hook:
1. Press PROGRAM * # followed by the system
password ( default is 1234).
2. Now press 000 and then SP-PHONE.
Enter the year.
3. Scroll to the month with the right scroll key
(located at the right bottom corner of the phone).
To change the month use the AUTO ANS / MUTE
4. Now scroll right again and change the date and
To change the day, again use AUTO ANS / MUTE
5. Scroll right again and the time will appear.
Set the time.
To change am/pm scroll to it, and again,
use the AUTO ANS / MUTE button.
6. Press PROGRAM to exit program mode and you
Posted on Mar 28, 2010
Can someone tell me how to change the time on the phone above listed.
Posted by dpickering on
You have to change from extension 101. Once you are on extension 101 then you need to press program then 0. enter date backwards ie(081104) then day (1=mon 2=tues 3=wed 4=thur 5=fri ect.) then enter time ie(0300 for 3:00) then 0 for am or 1 for pm. so it would go like this
Press program then 0
Enter (example for Tues. Nov. 11,2008 3:00 pm) would be
081104 2 0300 1
then press store then program again and it's set.
Posted on Nov 04, 2008
how to set speed dial on panasonic kx-t7730
Posted by anthonya19... on
If you are using the KX-T7730 phone on a Panasonic KX-Txx 308/824 system. From the Switcboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle/hook :
1. Press PROGRAM * # followed by the system password ( default is 1234).
2. Now press 001 and then SP-PHONE. Enter the system speeddial location ( 00 to 99 ) or just press SP-PHONE again to go to 00.
3. Enter your line access number ( usually 0 or 9 ) followed by the telephone number you would like to assign for the speeddial.
4. Press AUTO DIAL / STORE to save your setting.
5. To go to the next speeddial location press SP-PHONE and follow steps 3 and 4 again.
6. Press PROGRAM to exit program mode.
7. To dial the system speeddial from any extesion lift the handset and press * followed by the speeddial location ( example 00 )
Posted on Apr 14, 2010
Hi I need to know how we can lock the phone giving a code, also the Caller id is not displayed, please assist.
Posted by sachin_jd on
I have phone panasonic KX-T2375 MXW, but caller id is not coming.
Posted on Sep 17, 2011
Hello! Where can I get programming manual for KX-T7730. Panasonic system I am using the phone with is TES824.
Posted by raminnasib... on
i have 10 extentions but my call ring to all extentions. but the ring to one extentions 101 only plz tell me
Posted on Jul 15, 2012
hi everyone, I have got a panasonic KX TES824 system. The guy before me changed the default password of the system. How do i reset the password? I tried opening the box and i see two buttons. one reset and one clr/open or something. i pushed the reset button but it doesn't go to factory defaults. some one please help
Posted by apattat on
First the button clear position
anfter press hold reset 20sec
it will reset
after turn off PABX
move the button to open position
and strat the PABX
Please let me know this is helpful
Posted on Jan 06, 2011
i need to reset my panasonic kx-t7730 ... how to do it ?
Posted by tomazjr on
Reset it to what? What system is it connected to?
Posted on Jan 06, 2011
how to check call history
Posted by khurram137 on
It depends on what system the 7730 is connected to. If it's a TA series, then you can set a couple of *LIGHTED* buttons (left side) to track CID info. There are two types, Common and Personal. They are set by PROGRAM press the button and dial 96 for the Indication and 97 for the Selection. Each of those codes are saved with a STORE. Personals are 6 and 7. Be careful when you dial the 7 code, because it also happens to be the extension LOCK command :-) The TRANSFER button is the CLEAR command.
There is some system programming required for CID, but IIRC the default settings should be enough to make it work.
A much easier way to review all calls, is to capture the serial port SMDR data from the system. You can use Hypertrm or a commercial program like ProSMDR to put the reports on the network so everyone who has a password can see it. A free caputre program for Panasonic that runs under Windows 2000 or lower or on XP in emulation mode is Phonelogger (www.mft.com/phonelogger). It's tricky to set up, but it is pretty stable under Windows 2K...so it will run under just about anything, possibly even an ME box if you can get the serial port to behave.
Posted on Sep 10, 2009
please can you tell me how to change the date/time on my phone KX-T7730
Posted by nessp on
(this will then display current date and time - overtype as follows)
eg. for Friday 2nd November 2007 8:58 am you type the following
071102 (date backwards) [space] 5 (Friday is 5th day of week) [space] 0858 (time) [space] 0 (0 is am, 1 is pm)
Press the store button and then program button to exit the programming.
Posted on Nov 02, 2007
Model KX-T7730, CO4 button Says CO not assigned after I push the button
Posted by egoc on
CO Not Assigned
Posted on Aug 16, 2011
1,687 questions posted
Usually answered in minutes!