Panasonic KX-T7730 Corded Phone - Page 7 - Answered Questions & Fixed issues

When your system was installed, someone had to put the original message on it. They also should have documented HOW the did that.Generally, when we do it, it's a CUSTOM SERVICE greeting or COMPANY greeting and they go numerically in the TVA systems. So, the opening message is probably CS1 or CG1. Try looking around for the manual.Carl

Set outgoing line preference.Or simply swap the CO1 and CO2 line plugs.The plug from your service provider that enters in CO1 put it in CO2 port and vice versa.You may need alittle config as well.

i need change date

It says "Not Stored" because you haven't stored anything in it. There are 12 buttons on the left side with lights and 12 buttons for feature dialing on the right. If you want to monitor extensions, the buttons on the left are the ones to use. If you want to store speed dial numbers and feature codes use the ones on the right.

Left button programming. Press PROGRAM and the button. For extensions, dial 1+ext and STORE. For CO's, press 0+line number, for inside codes press 2+code, for outside number press 2+9+number, all followed by STORE.

Right button programming. For inside codes dial the code, for outside number press 9+number followed by STORE.

Note that you could also dial "8x" or "80x" in place of "9" for specific line access. Also, you can store extension speed dial numbers on the right, you just won't get a light indication when they're busy.


Carl

go to the instr. manual section troubleshooting and proceed to unlock.God bless you

http://service.us.panasonic.com/OPERMANPDF/kxt7720.pdfTry this. hope it helps.

Nothing special on the phone. Special on the system. Better to have a manual and set the options in the programming. You can program a couple of buttons to display call logs (on a TA-824) and Name/Number display.

Let's see. Panasonic made 4 or 5 6x16 phone systems, and the ones that had CID required a card ending in part number -93. That and programming and CID service from the telco and you can have Caller Id.Carl

do you mean call divert?
its possible.
we could do it.

There are three types of CALL FORWARDING:1. All Calls: Means all of your calls will be diverted to another extension Go On Hook+ Press 711 +Ext. No. + # then go Off Hook2. Busy/No Answer: Means when your extension is Busy the call diverted to another extension. Go On Hook +Press 712 + Ext. No. + # then go Off Hook3. To Oustide CO Line: All calls will be diverted to Outside Line (eg. Mobile Phone/Home Phone) Go On Hook + 713 + 9 + Number + # + Go Off Hook

My 773x phone is attached to a TAW-848 Key Service Unit and it has a set of programming instructions. So does the TA series or the KXT series KSU's.Ringing is programmed in those units.Carl

The 7730 is a Panasonic Analog System phone. It plugs into a Key Service Unit and the line port plugs into the PAP2T device. Model numbers like KXT-A624/824 are examples.

Carl

their should be a button on the side of the phone that will turn both ringer on and off.

What you want to do is to activate the call forwarding feature offered by your phone company. Different phone companies have different procedures. With many companies you dial *72 then at the second dial tone dial the number to forward to. This number has to answer the call to activate call forwarding.For precise instructions please contact your telephone company.

First check the profile mood, and then check customize profile, alert type, ringtone volume.

Check your Speaker, If it is ok then check the connector of the speaker.

So that we're on the same page, a 7730 has PF bottons on the right and "CO" buttons on the left. If you have a different phone, like a TA-308xx or a Euro phone that isn't offered in the U.S., then it may only have a single row of buttons.

Programming is the same. If the button is a CO button (with a light), then your one touch requres a "2" in front of it to speed dial a nunber and a "9" or outside line access code to dial an outside number. So, to call 212-555-1212 you press PROGRAM the CO button, 292125551212 STORE. An inside number is stored under the CO button with a "1" plus the extension number.

A PF button already has the assumed "2", so you would just dial 92125551212 in the example above.

Carl

When we set up a Panasonic voice mail system, you have a menu that plays. Usually, there is a Company Greeting, then a Custom Greeting. They are changed from mailbox 998 option 5 then 1 or 3 depending on which greeting you want to change. Of course, you may not have a TVA or TVx voice mail system, but I'm guessing that's what you have. In all cases, the Company greeting plays in front of the Custom greeting. By default in a TVA it's probably both greetings 1. You can log into the system and play them without changing them to verify what's where.Carl

chek your cable and reset your phone..

HelloTry these links to download the manual to your phone.panasonic.com.au/Support/.../Downloads+and+documentationphone.manualsonline.com/manuals/.../panasonic/panasonic_cordless