Top 20
Panasonic KX-T7731 Corded Phone - Page 6 Questions & Answers
I can't get the msg light to go off on my
What happens when you dial 700-0 on the intercom?
7731's work on 18 different Panasonic models, but they were first delivered with the later TA series phone systems. You could press the MESSAGE key and look at the display to see where the message came from, but I don't think you can erase it on a 7731. So, just record the fact, then 700-0 and poof. All gone.
Carl
10/5/2010 8:09:31 PM •
Panasonic...
•
409 views • 2 helpful votes
I am getting a pref.Out
HUH? You program autodial for the SYSTEM from a SYSTEM phone in SYSTEM programming. You program the "auto dial" buttons, the ones on the right side of your phone from the phone by pressing PROGRAM one of the 12 buttons and dialing "9" plus the number SAVE.
If you are trying to program one of the left side buttons for autodial (bad move) then you dial "29" first.
Carl
10/19/2010 2:46:07 PM •
Panasonic...
•
259 views • 0 helpful votes
On Panasonic how do I
This is done through installer level programming typically by a service technician.
12/11/2010 11:33:52 PM •
Panasonic...
•
56 views • 0 helpful votes
How do I turn Do
It really depends on which one of group of up to 18 cabinets your 7731 is connected with, but in a TA series, 714# on the intercom sets, 710# clears. You can also press Intercom the FWD/DND button and dial 0#. (or 4# to set it again)
Carl
10/2/2010 12:20:39 AM •
Panasonic...
•
339 views • 0 helpful votes
I would like to listen
depending on what system you have here are 2 options for personal messages -
TVM system dial into voicemail (usually 200 or 500) dial 3 1 1 and follow the prompt (the older system is option 5 1 1)
SVM dial *382 your message will be played back to change it dial *381
Button programming
Press PROG
Press BUTTON to store
Press 1
enter extension no of who you want
Press STORE
11/13/2010 3:42:32 PM •
Panasonic...
•
106 views • 0 helpful votes
How do I change the
This is one of those conditional answers. Your 7731 works on one of 18 different Panasonic systems. Which one is yours? In a TA series, you get 5,10,15, or 20 seconds before the forward works. That's all you have. It's different in a TAW, TD, TDA, and probably non existant in any system prior to the TD.
The time is adjusted system wide as program 202. In a TAW and TDA it's adjusted per phone.
Carl
11/1/2010 10:24:01 PM •
Panasonic...
•
144 views • 0 helpful votes
HOW TO TURN ON CALLER ID
D on a 7730 requires 3 things, CID service from the phone company, programming on the sytsem, and a CALLER ID CARD. The card can only be added to TA-624/824, TAW-848, TD-816/1232, and TDA/TDE/NCP sytsems and has a part number ending in 93.
The card either fits on top of the CO card or in the cover of the system cabinet and plugs into the main board. The price of the card is about $50-75 per port and they come in either 3,4, or 8 port versions, for the particular system.
Carl
9/15/2010 2:14:28 PM •
Panasonic...
•
409 views • 0 helpful votes
I would like to change
enter system programming
Press PROG *#1234
use arrow keys up and down to find date and time - use NEXT key it the screen to move on to next screen
Programming can only be done from a larger style handset on any extension number
11/12/2010 4:29:46 PM •
Panasonic...
•
83 views • 0 helpful votes
I bought a home with the Panasonic KX-t7731 phone
What's answering the calls, is it the Panasonic system or the central office? When you figure that out, and it's locally, then post back with the model number of your phone sytsem cabinet and whether you dial 107 or 115 ot get into voice mail, or the message is left in the central office.
Carl
8/31/2010 5:24:26 PM •
Panasonic...
•
474 views • 1 helpful votes
How do we delete all voice mail messages at one
In the unlikely event that you really want to do that, the quickest and dirtiest way is to delete the specific mailbox and reinstall it.
The more elegant way is to forward the messages to another box and delete that one.
Both events are done in system programming and/or from mailbox 999.
Carl
8/30/2010 7:45:56 PM •
Panasonic...
•
427 views • 1 helpful votes
How do I reset time and date
Which system do you have? Below are the Panasonic systems. Be sure you find yours.......
Panasonic
XDP 824/1232
All programming is done at ext. 101
1) Press the program button, followed by *#1234
2) Dial 000, then follow the prompts on the LCD
KX-T308, KX-T616
- Use phone with intercom number 11. It will change the
time for all phones.
- Keep handset down and press INTERCOM button.
- Dial 77.
- Dial the hour, with two digits (e.g. 03 for 3 o'clock).
- Dial the minutes, with two digits (e.g. 07 if it is now
7 minutes after the hour).
- Dial 0 for AM or 1 for PM.
- Press #.
- Press SP-PHONE
Panasonic
KXT Series Telephone System
Setting
the time must be completed from an LCD Display phone at Extension 11, using the
telephone keypad. This system type requires "Easa-phone" series
or a 7000 series model telephone (the model number is listed on the bottom of
the phone) that has one or more small switches located at the rear of the phone.
Digital "XDP" phones can not be used on this
system type!
To
set the time:
-
Lift
the handset or press "SP-Phone" button on Extension 11.
-
Dial
"77"
-
Enter
the hour with 2 digits. (01 through 12)
-
Enter
the minute with 2 digits. (00 through 59)
-
Dial
(0) for AM or (1) for PM.
-
Press
the "#"
-
Wait
for confirmation tone. (Instantly after pressing the # button, new time
counting will start).
KX-TA624
- Use phone with intercom number 101. It will change the
time for all phones.
- Move MEMORY switch on rear from SET to PROGRAM.
- Dial *#1234
- Dial 000
- Press NEXT ("Sp-phone")
- Press Right Arrow ("FWD/DND") four times
until you see the time displayed
- Change the hour with the keypad
- Press Right Arrow ("FWD/DND") to reach the
minutes field
- Change minutes with the keypad, if necessary
- Press AUTO DIAL/STORE
- Press HOLD
- Move MEMORY switch on rear from PROGRAM to SET.
KX-TAW848
- Use phone with intercom number 101. It will change the
time for all phones.
- Press PROGRAM (or PAUSE, if you don't have a PROGRAM
button.)
- Dial programming access code (probably *#1234)
- Press NEXT (SP-PHONE, if you are not using the
programming template).
- You'll see "Date & Time Set" on your
phone's display
- Press STORE
- Press NEXT to see hours and minutes.
- Use your keypad to change the hour
- Press STORE.
- Press HOLD.
- Press PROGRAM
KX-T123211D
- Use phone with intercom number 101 (probably the
receptionist's phone). It will change the time for all phones.
- Move MEMORY switch on back of that phone to PROGRAM.
- Keep handset down and press 0 on touch-tone dial.
- Dial year with two digits (e.g. 97 for 1997).
- Dial month with two digits (e.g. 01 for January).
- Dial date with two digits (e.g. 03 if today is the
third day of the month).
- Dial day with one digit (1 for Monday, 2 for Tuesday, 3
for Wednesday, 4 for Thursday, 5 for Friday, 6 for Saturday, 0 for Sunday).
- Dial hour with two digits (i.e. 01 for 1 o'clock).
- Dial minutes with two digits (i.e. 07 for 7 minutes).
- Dial 0 for AM, or 1 for PM
- Press either AUTO DIAL/STORE or AUTO/MEMORY, depending
on your phone.
- Move MEMORY switch on back of phone to SET.
Panasonic DBS 824, 40, 72 & 96
- From the Attendant's display
phone.
- Press "On/Off"
- Press "Prog"
- Press " ##"
- Press "FF1 key"
- Dial 1#, 2#
- Dial the time in 24 hr format.
- Press #
- Press "On/Off"
- From any display phone in the
system.
- Press "On/Off"
- #98 + Password
- Press "Prog"
- Press " ##"
- Press "FF1 key"
- Dial 1#, 2#
- Dial the time in 24 hr format.
- Press #
- Press "On/Off"
Panasonic DBS 576 & 576 HD
From any display phone in the
system;
- Press On/Off
- Press "Prog"
- Press " * * "
- Dial the " Password"
- Press "FF8"
- Dial 81001
- Dial in new time in 24 hr format.
- Press Hold and then "On/Off"
8/19/2010 4:09:48 PM •
Panasonic...
•
398 views • 0 helpful votes
How do you set the time on a panasonic kxt7731
Which system. See below. BUT make sure you find your system first....
Panasonic
XDP 824/1232
All programming is done at ext. 101
1) Press the program button, followed by *#1234
2) Dial 000, then follow the prompts on the LCD
KX-T308, KX-T616
- Use phone with intercom number 11. It will change the
time for all phones.
- Keep handset down and press INTERCOM button.
- Dial 77.
- Dial the hour, with two digits (e.g. 03 for 3 o'clock).
- Dial the minutes, with two digits (e.g. 07 if it is now
7 minutes after the hour).
- Dial 0 for AM or 1 for PM.
- Press #.
- Press SP-PHONE
Panasonic
KXT Series Telephone System
Setting
the time must be completed from an LCD Display phone at Extension 11, using the
telephone keypad. This system type requires "Easa-phone" series
or a 7000 series model telephone (the model number is listed on the bottom of
the phone) that has one or more small switches located at the rear of the phone.
Digital "XDP" phones can not be used on this
system type!
To
set the time:
-
Lift
the handset or press "SP-Phone" button on Extension 11.
-
Dial
"77"
-
Enter
the hour with 2 digits. (01 through 12)
-
Enter
the minute with 2 digits. (00 through 59)
-
Dial
(0) for AM or (1) for PM.
-
Press
the "#"
-
Wait
for confirmation tone. (Instantly after pressing the # button, new time
counting will start).
KX-TA624
- Use phone with intercom number 101. It will change the
time for all phones.
- Move MEMORY switch on rear from SET to PROGRAM.
- Dial *#1234
- Dial 000
- Press NEXT ("Sp-phone")
- Press Right Arrow ("FWD/DND") four times
until you see the time displayed
- Change the hour with the keypad
- Press Right Arrow ("FWD/DND") to reach the
minutes field
- Change minutes with the keypad, if necessary
- Press AUTO DIAL/STORE
- Press HOLD
- Move MEMORY switch on rear from PROGRAM to SET.
KX-TAW848
- Use phone with intercom number 101. It will change the
time for all phones.
- Press PROGRAM (or PAUSE, if you don't have a PROGRAM
button.)
- Dial programming access code (probably *#1234)
- Press NEXT (SP-PHONE, if you are not using the
programming template).
- You'll see "Date & Time Set" on your
phone's display
- Press STORE
- Press NEXT to see hours and minutes.
- Use your keypad to change the hour
- Press STORE.
- Press HOLD.
- Press PROGRAM
KX-T123211D
- Use phone with intercom number 101 (probably the
receptionist's phone). It will change the time for all phones.
- Move MEMORY switch on back of that phone to PROGRAM.
- Keep handset down and press 0 on touch-tone dial.
- Dial year with two digits (e.g. 97 for 1997).
- Dial month with two digits (e.g. 01 for January).
- Dial date with two digits (e.g. 03 if today is the
third day of the month).
- Dial day with one digit (1 for Monday, 2 for Tuesday, 3
for Wednesday, 4 for Thursday, 5 for Friday, 6 for Saturday, 0 for Sunday).
- Dial hour with two digits (i.e. 01 for 1 o'clock).
- Dial minutes with two digits (i.e. 07 for 7 minutes).
- Dial 0 for AM, or 1 for PM
- Press either AUTO DIAL/STORE or AUTO/MEMORY, depending
on your phone.
- Move MEMORY switch on back of phone to SET.
Panasonic DBS 824, 40, 72 & 96
- From the Attendant's display
phone.
- Press "On/Off"
- Press "Prog"
- Press " ##"
- Press "FF1 key"
- Dial 1#, 2#
- Dial the time in 24 hr format.
- Press #
- Press "On/Off"
- From any display phone in the
system.
- Press "On/Off"
- #98 + Password
- Press "Prog"
- Press " ##"
- Press "FF1 key"
- Dial 1#, 2#
- Dial the time in 24 hr format.
- Press #
- Press "On/Off"
Panasonic DBS 576 & 576 HD
From any display phone in the
system;
- Press On/Off
- Press "Prog"
- Press " * * "
- Dial the " Password"
- Press "FF8"
- Dial 81001
- Dial in new time in 24 hr format.
- Press Hold and then "On/Off"
8/15/2010 2:29:30 AM •
Panasonic...
•
445 views • 0 helpful votes
How do I program a speed dial out side number on
What happens when you dial "9" on the intercom? If that gets you an outside line, then press PROGRAM, one of the buttons, and dial 9 plus your number and STORE.
Hmmm...Speed dial :-)
If you get a vacant line at "9", then you need to reprogram your 400 line access on your phone sytem to disable the vacant lines.
Carl
8/31/2010 2:50:48 PM •
Panasonic...
•
215 views • 0 helpful votes
I have a Panasonic KX-T7731
A 7731 phone is compatible with about 18 different Panasonic phone sytem cabinets. Panasonic calls this line preference-outgoing and, in a TA series, which you're most likely to have, you press PROGRAM and dial 12 STORE for idle line, or 13 and a number from 1-8 for a specific line and STORE. 11 STORE puts it back to no preference.
Carl
8/20/2010 7:37:32 PM •
Panasonic...
•
252 views • 0 helpful votes
HOW CAN I RECORD MESSEGE
What manual? The message on hold comes from an external source plugged into the system cabinet. It has it's own manual had hardware.
Carl
10/7/2010 6:34:36 PM •
Panasonic...
•
68 views • 0 helpful votes
Not finding what you are looking for?