Top 20 Panasonic KX-T7731 Corded Phone - Page 5 Questions & Answers

Look at the phones. The one that shows both the name and number is either a 7735 or 7736 :-) They are 3 line of display as opposed to the 2 lines of the 30 and 31.

In a TA series phone system, you can adjust what is logged and either have name or number priority, you would press the CID-S button that you set up to toggle to the opposite display while the phone is ringing or you're talking. It's section 9.3 of the maintenance tool or 904 in system commands.

Carl

Typically DND is turned on and off by pressing the FWD/DND button. There are three status conditions for this button indicated by the button light.
button light off: both features off(Forwarding and Do Not Disturb)
button light blinking red: Forwarding on
button light solid red: Do Not Disturb on

The functionality of this button can be customized by the phone system installer to work differently than outlined above. Station features can also be accessed through station programming using the LCD screen by pressing the button then either scrolling through the features using the LCD screen navigation keys or entering the specific program number as in 50 for FWD/DND programming.

Calls log auotmatically to phones that ring. If more than one phone rings the call will log on the phone that answers. If no phone answers, the phone connected to the lowest port number will log the call. The lowest port number is usually the lowest extension number, but not always depending on how the phone system installer numbered and connected the extensions. Also if a call is transferred to a phone it will log. The logged calls can be seen by navigating the LCD screen.

This question comes up a lot on FixYa. You still need 3 things, CID service from the telco, A CID card, and programming. If your phone is ringing and it says CO CALL or something similar, I'd be looking for the CID card first.

Carl

Call voicemail, dial #6 followed by * and your mailbox number, then you will hear prompt for password if your mailbox is password protected.

How do I reset from the attendant station or access 999

You MUST do it at the Main Extension handset - usually 101.
With the handset on the cradle:
Press Program button
Enter *#
Enter the system password - system default is 1234
Enter 000
Press the Auto Dial/Store button
Enter date using the Scroll button (the round one used for spkr volume) to move to right and left to next field
Press Auto Dial/Store button to accept setting
Press Redial button to move to time
Enter time using Scroll button (the round one used for spkr volume) to move to right and left to next field
Press Auto Dial/Store button to accept setting
Press Auto Ans/Mute to exit Date & Time
Press Program Button to complete

Hi,

You can transfer only one time that is before going voice to mail extension.Sorry it is not possible.

Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thank you for using fixya have a nice day:-)

Since a 7731 is a display phone and they were first made when Pana intro'ed the TA series, I'd go for 101, 102 etc. Try dialing 0 and look at the display of the phone that rings. The extension number should be displayed. Other Panasonic numbers were 11+ for a 2 digit board in the 30810 and 61610 flat packs and in the U.K. they probably had 21+ in some of their boxes.

Carl

If it's a Panasonic brand TVx voice mail, the access code is #6* and your extension. That identifies you as a user and is the same as if you dialed the voice mail system from your own phone.



Carl

Press PROG/PROGRAM
Press the button you want to store the number under
Press 2
Enter the number to dial (remember to prfix with your line access code usually a 9)
Press STORE

intercom 7o * #

Not possible. A Panasonic Analog PITS phone has only one ring sound and all CO rings match.
The TD series and 74xx phones were the first phones to have 8 ring tones. The TDA series has 30 different tones. Prices are fairly competitive for upgrading.

On the intercom dial *7510 (*7511 turns it back on in a TDA-50 or lower) and *751x (1 or 2) turns it on in a 100 or larger.

Carl

transfer button, extension number, then hang up reciever

There are two passwords you could be asking about, the electronic station lock, or a voice mail password. Each has a different login procedure and is based on the hardware you have, not the phone type.

Since this is an open forum, it is not possible to give specific details about equipment you didn't mention, but if you look around your documentation, you'll find the instructions for administering both the phone system and voice mail. One is reset from the attendant station, and one from mailbox 999.

Carl

TVA and TVS systems have master passwords that the installer has. If you lost the password to 999, then your installer can probably come out and reset them. If you have lost the master password, Panasonic can restore that, but it's not easy.

If you happen to have the password for 998 and 999, you get there by pressing #6 *99x at the login. Put in your password and IIRC admin is option 5 or 6 in 999.

Carl

It's automatic. Press the SP Phone button.

My headset is a TCA-60 and it works in all systems on all Panasonic phones.

Carl

A 7731 phone will function on any one of 18 or so different Panasonic system cabinets. Now, which "user guide" are you looking at? SYSTEM speed dial is set from the first extension or the maintanance console of the phone system. PERSONAL FEATURE (speed dials on the right side of the phone) are pretty much universally programmed by PROGRAM button, 9+ number STORE.

What do your instructions say?

Carl

Since the phone can work on about 18 different systems, that depends.

790 on the intercom clears extension data. It may not set it back to "original settings".

Carl