Top 20 Panasonic KX-T7731 Corded Phone - Page 3 Questions & Answers

Go to web page for that phone manufacture look up the phone model.Could also bing or google it.

Yes. It requires both pairs to be connected back to the KSU and you lose the XDP that isn't on the back of an analog phone. Also, you can't plug it into an XDP of an existing digital phone.Carl.

There's only the adjustment on the left side of the phone (a 3 postion switch). The next model up has a (you can't turn off the ringer) mode, but it's not available in any analog set.

Carl

Without picking up the handset, press "1" on the keypad. It turns background music on and off.

Carl

Press the Program button. Press the button you want to program. Then enter 1 followed by the extension number (ex. 1101) then press the autodial/store button. You should hear one long steady beep.

That's because whatever system it's connected to, it either has to be in the port by itself, or you have to BRIDGE the answering machine in system programming. You pick.

If it's a port on a TA series, you can tell the system there's an answering machine on it and it will let you override the incoming playback and pick a call from the line.

Carl

To what, for what? The buttons can be used to dial inside or outside numbers. They're programmed by pressing PROGRAM, the button, and dialing a sequence. If the call is outside, that sequence includes an "access code" usually "9" then STORE.

Carl

Unfortunately, no. Even though it blinks like it does if you were in speakerphone mode, the mute doesn't work.

Carl

My default designation label has 24 lines, the top ones in white and the bottom ones in gray. If you left justify the top and right justify the bottom text, you'll get 24 items in.

Here's a simpler way :-) http://public.carl.airpost.net/misc/77xx%20labels.xls

Carl

I"d start by pressing the Caps Lock button on my keyboard to ask a question and use that key marked Shift to capitalize the first letter of a sentence and proper names.

Extension names are programmed in SYSTEM programming. Access to that is done from the phone connected to the first extension in your system, usually 101, with a system password. In a TA Series, it's program 604. In some others, it's program 004.

Carl

Panasonic analog phones plug into analog KSU's and have extension numbers beginning with 101. In additon, you can dial 0 to reach the phone programmed as Operator, and it's usually extension 101.

With the intercom dial tone (press INTERCOM or pick up the handset or press SP PHONE) you can start dialing codes defined in your number plan. You can also program left side buttons to monitor are directly select other extensions or dial codes to page all idle speakers in a 77xx phone.

Note this is specific to TA series systems, but the operation is similar in all Panasonic models.

Carl

Yes, the KS-T7731 has a call forwarding function. Step-by-step instructions are available on page six of the manual, available here;

http://www.fixya.com/support/p123428-panasonic_kx_t7731_corded_phone_kxt7731/manual-7398

On my typical 7731, if I press the MESSAGE button on an idle phone, it tells me where the message came from. It could be from any internal station, not only the voice mail system.
Dialing 700# on the intercom cancels all messages. Keep in mind that the 7731 works on several different Panasonic systems. Mine is the TA-824. That command works on most TA series (308,624,824) . On the other systems the code would be 700 and your extension, or *700 ext on TD,TDA,TDE,TAW, NCP etc. boxes.

Carl

All Panasonic systems that the 7731 would plug into has an MOH port. You provide 8 or 600 ohm sound levels and do some programming to make it work.

Carl

From the idle phone, press PROGRAM and line 1, then dial 0 01 STORE

Lift handset and drop it back down to exit PROGRAM.

Carl

No. An 824 is analog and the 76xx is digital that works only on the TDA/TDE/NCP systems.

Older analog phones (70xx,71xx,73xx and 75xx) will work, and possibly some of the old 616 and 1232 sets, as well as a 308xx 3-line set.

Carl

Keep pressing the * key on an idle phone. It has 3 steps.

Carl

Caller ID requires 3 things, service, hardware, and programming. The hardware is a CID card with a part number ending in 93, as in TA62493,82493,TD193 etc. Then system programming in the 900's turn it on for each CO line and the phone needs to be ringing to display CID when the phone rings.

Carl

Manual to what? A 7731 is a Panasonic phone that connects to a Key Service Unit. If your KSU happens to be a TA-824 delivered in the U.S., it has a DISA card built in and the instructions are probably in the OM. There, you record a set of instructions that let the system answer and route the caller by digits dialed. If you're using a different KSU, then you may have the Auto Attendant on a Panasonic Voice Mail system do the messages and routing. That set of instructions will be in the Voice Mail installation guide.

Carl

Check out the system programming manual for your particular cabinet. Somewhere, like in the 40x's, there's an instruction to program ringing for each extension in day, night, and lunch modes.

Carl