20 Most Recent Panasonic KX-TG2356 Cordless Phone - Page 9 Questions & Answers

KX-TGA101S is an add-on handset for a Panasonic KX-TG1000 series cordless phone system. One of the models that is compatible with the handset is the KX-TG1032S. You can find the manual for the phone system on the product page here: https://shop.panasonic.com/support-only/KX-TG1032S.html . Assuming that you do not have voice mail from your telephone provider, you can change the number of rings from the Answering Device Settings Menu. Start with the phone system in standby (no incoming or outgoing calls) mode. Press Menu and use the up/down keys to navigate to Answering Device. Press OK to enter the sub-menu. Navigate to Settings and press OK. Navigate to Ring Count and press OK. Use the up/down arrows to choose a new number of rings. Press OK to save and press Off to exit the menu system. Note: if the ring count is set to Toll Saver mode, the answering system will pick up on the second ring if there are new messages. It will pick up the incoming call on the fourth ring if there are no new messages. See page 31 of the manual for the KX-TG1032 for this information. See page 23 for the way to navigate through the menu and a list of the menu tree items. The current link to the manual is ftp://ftp.panasonic.com/telephone/om/kx-tg1031_en_om.pdf . I hope this helps. Cindy Wells

not *217 try #217 menu see page 41 of https://panasonic.ca/viewing/ALL/KX-TG7731/OI/TG7731_PNQX5106ZA/TG7731_PNQX5106ZA.pdf check relatives phone number is not sitting in blocked callers list see Viewing/editing/erasing call block numbers page 41

https://www.youtube.com/watch?v=BKfEsZEaf5I

Hi! Below is the image of your phone keyboard with the PROG key circled.

If the image is smallish to see hit the CTRL + keys and the image will enlarge.


Regards and thanks for using Fix Ya.

Battery replacement

short in speaker circuit causing call to disconnect

Download from https://www.manualslib.com/manual/118348/Panasonic-Panafax-Uf-550.html https://manualsbrain.com/en/manuals/1194965/

Are you referring to call id ?

kx-tsc92cid where can I get the manual

Older question for this vintage phone may have steps that work: https://www.fixya.com/support/t243910-set_time_panasonic_kx_t7731_thanks

you could try takeing the battery out and puting it back in again, might work, all the best hope it works.

Could be the batteries are just kaput. Will show they are charged but have a 2 second lifespan. Cheapest and easiest solution is to get a new battery pack and test that. https://panasonic.ca/viewing/ALL/KX-TGA750C/OI/TGA750C_PNQX2421ZA/TGA750C_PNQX2421ZA.pdf Looks like it uses standard NiMH batteries, even better

More than likely you have a bad circuit board behind the LCD. The LCD is the display itself. I've seen where someone did a bad job of soldering job, (cold solder joint created by flow soldering), at the factory. It may have passed quality control initially but one good hard bump and the 'cold solder' joint that was created at the company just got 'born.' It happens. Most of the time it's not a problem, but you will run across this every now and then. It looks like you 'then.' If it's still in warranty, take it back and ask for an exchange. If it's just past warranty, take it back anyway! Usually sellers understand and won't have a problem with an exchange. Understand...It's not a user fixable thing!

Caller ID will only be available if you subscribe to that service from your telephone provider. Some PBX systems do not provide compatible Caller ID information. The KX-TGA810E handset will not display any Caller ID information if the telephone company Caller ID format is not in the expected format. The KX-TGA810E is an add-on handset for certain Panasonic cordless phone systems, including the KX-TG8100. For more information about the handset, see https://www.manualslib.com/manual/650310/Panasonic-Kx-Tga810e.html#product-KX-TGA810E . The KX-TG8100 manual section on Caller ID is available here: https://www.manualslib.com/manual/117913/Panasonic-Kx-Tg8100e.html?page=25#manual . The complete manual for the KX-TG8100 is https://www.manualslib.com/manual/117913/Panasonic-Kx-Tg8100e.html . I hope this helps. Cindy Wells

Unfortunately, I can't find a manual for the KX-30P available online. I did find a manual for the Panasonic KX-20P, ftp://ftp.panasonic.com/homeoffice/om/kx-20_en_om.pdf . I suspect the 3 hole punch did not change significantly between models. Panasonic also has a manual for the KX-32P (2 or 3 hole punch), ftp://ftp.panasonic.com/homeoffice/om/kx-32_en_om.pdf . Other Panasonic home office product manuals are currently here: ftp://ftp.panasonic.com/homeoffice/om/ . I hope this helps. Cindy Wells

Do you want to erase all messages? Are you looking at the handset, the base or are you calling the KX-TG885SK remotely? 1) At the base, press Erase during playback of a message to delete the current message. To erase all messages from the base, press Erase twice when the phone system is in standby mode (no active calls/incoming calls). 2) From a handset, use the menu to access the Answering Device sub menu and choose play new message or play all messages. (Alternatively, press Menu # 3 2 3 to play new messages or Menu # 3 2 4 to play all messages.) During playback of a message, press * 4 or pause the message. After pausing the message, highlight Erase and press Select. Confirm this. To erase all messages, choose Erase All messages (Menu # 3 2 5) and follow the prompts to confirm (highlight Yes and press Select). You can also press * 5 to erase all messages from the Answering Device sub menu. 3) During a remote call, *4 and * 5 work as above when using the handset. See pages 70, 71, and 74 in the operating manual. The manual is available on the Add-on Handset page: https://shop.panasonic.com/cordless-corded-telephones/telephone-handsets/KX-TGFA61B.html . The current link to the manual is http://help.panasonic.ca/viewing/ALL/KX-TG885SK/OI/TG885SK_PNQP1397ZA/TG885SK_PNQP1397ZA.pdf . I hope this helps. Cindy Wells

Manual lists a manufacturer Customer Care phone number to call to request assistance. https://www.panasonic.com/content/dam/Panasonic/support_manual/Telephone_Equipment/English/KX-TG1611NZ_KX-TG1612_&_KX-TG1613_Operating_Instructions.pdf

It should be a round multi function key near the right hand side

The KX-TGA model prefix usually means the handset of a Panasonic cordless phone system. Most of the time to find the manual, you need the model number of the base. The handset model number isn't always listed in the manual or on the product support site. I did find a manual for the KX-TG2431 and KXTG2432 here: https://panasonic.ca/PCS/OperatingInstructions/KXTG2431-32-OI-Eng.pdf . The handset of this cordless phone system uses the same handset battery as the KX-TGA244W. I hope this helps. Cindy Wells

It sounds as if you have outbound CID blocked on your trunks just like mine. It is also possible but very unlikely that way down in the KSU programming the CLIP function was enabled bogus information to fool the other party. Like I said UNLIKELY but possible.