Top 20 Navigon 7200T GPS NAVIGATOR PERPW/ FREE TRAFFIC VOICE ENTRY Questions & Answers

Not sure it this is like my Nuvi but you have to select a Language with ( TTS ) ending that is Text-To-Speech .... other i aw were i thnk something that says ( Eesti )

But it should be in the Language setup

Here you go on link below is the manual. Please rate 4 thumbs for the free answer.

UserManual.pdf">http://static.tigerdirect.com/pdf/Navigon-7200t-UserManual.pdf

Bad charger - not powerful enough, Use a Gomadic charger with tip # 24. Works for me.

I have the same issue did u ever figure out how to fix it?

Have you tried to reset the device. Probably some settings might have changed which can be easily rectified by resetting the device.

You can access the Traffic information by :
1) Tab Options > Traffic
The TRAFFIC INFORMATION WINDOW opens.
On the Navigation map, the (TMC shortcut) button can also be used to display
the TRAFFIC INFORMATION WINDOW. The TMC shortcut button displays when traffic messages have been received and are currently available.
2). Tap the Traffic information button to view a list of available traffic message types.
3). Tap on the type of messages to display.
4). Tap the OK button.

You can follow the instructions in your User guide also.

You need a stronger charger. I use a gomadic with tipo#24 and it works.

It certainly is possible!

Go to www.navigonusa.com and click on Customer Support. From there, go to the Download Centre and then to Product User Guides.

You will find the Spanish Edition of the manual for your 7200T on the list.

the power switch is on top left of the unit

Go to the volume screen. Tap the buttons for louder and softer. If the volume indicator does not move then goto solution A. If the indicator does move but you do not hear the voice say "louder" or "softer" goto solution B.

A. There is a problem in your settings file. You need to reset these files to factory status. This will reset all your settings to factory default. From the main screen hit Options then hit Options again. You should see a button that says "set to factory" or something like that. Click that and then reenter your custom settings as you like. Problem fixed.

B. You have a hardware problem. Call Navigon support for repair options.

put phone in discoverable mode then on gps go to bluetooth and new conection. when gps finds phone click on it and pair the devices.

Here is the link to it!

http://navigonusa.com/_pdf/manual/Manual_7200T_English_Rev1_1.pdf

You will need Acrobat Reader on your PC to read,

Please Rate!

These units have a circuit which detects if the charger is plugged in. It could be a problem with that circuit in which case you would have to get it repaired.

Use the car adapter

remove back cover and disconnect battery.

1. Use a thin object to press the reset button located on the right side of the device. The device will be switched off. 2. Press the power button for at least 10 seconds to switch the device back on.

No Code

HelloCheck the power source. If the battery of the vehicle has not enough charge, this may happen. Check it. The problem is with its working voltage itsef. OK.

With the help of NAVIGON Fresh you can reinstall the software and thus return the device to the factory state. This can be necessary when the device does not work properly anymore or when the software freezes, crashes or otherwise does not behave as intended.

Please be advised that after reinstallation your saved data and favorites will be deleted. After reinstallation a software update or reinstallation of maps can be neccessary as well.

In order to reinstall the software and return the device to the factory state follow the steps detailed below:

1. Check if your device is on the compatibility list for the device restore
process.
2. Charge your device fully with the car or home charger.

3. Connect it via USB cable directly to your PC and turn it on.

4. Start the NAVIGON Fresh program and log in to your account with your
email address and password.

If NAVIGON Fresh is not installed on your PC, you can download the
software here.
5. Go to the menu bar at the top window border and click on
"My Navigon Device" and "Restore Device".

6. If NAVIGON Fresh does not recognize your device, please contact the
service center.

7. Follow the instructions and choose the device which you want to restore.

8. When the wizard has lead you through all the steps, click "next" to
begin the device restore.

9. As soon as the device restore has successfully finished, check for
updates for your device and install them.

Car gps's don't typically have this feature but if you list the model you have I could tell you easily

Could send us the model?