Top 20 One For All URC-9800 LCD Remote Control Questions & Answers

Hello, Twomufflers -

Doesn't Comcast provide you with a remote to use for the cable box?

We have AT&T Uverse as our cable provider and have an AT&T remote control for each of our cable boxes.

One of our TVs is a Vizio and we only use the Vizio remote control when we need to change something through the TV menu - like when we change from HDMI input (for cable programs) to AV input to watch a DVD.

One For All... | 707 views | 0 helpful votes

Check other codes. If you wish to get more details, check this site. Pull up older posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Two digit, three digit, four digit and five digit setup code list to different models remote controls are given. If you search the site in Timeslide option, which can be selected from the drop down list at the top left of the display window, it will be easy to locate the related post. You can also do a search by type in the brand name and model number to your device into its search box at the top right of display window. Check this site too.

One For All... | 18 views | 0 helpful votes

If your apex digital tv converter box is an Apex DT250

My best guess is: 0749

Here is your remote manual:

3 digit code: 864
4 digit code: 0749
5 digit code: 52478

One For All... | 311 views | 1 helpful votes

try to turn on directly by now. 2( you must find another remote control from r. shack or another stores electronic, or ask to the supplier cable.

GOd bless you

One For All... | 45 views | 0 helpful votes

If you can give the model number of your universal remote, maybe I can give you the code.
Post it here so I can help you further.

One For All... | 926 views | 0 helpful votes

Try another code, sometimes there are several similar ones. Check with One for All.

I hope I have been of help but please do not hesitate to ask if you have any further questions.
I appreciate your vote if you appreciate my reply and remember, even if you don't vote for me a please and thank you goes a long way.

One For All... | 34 views | 0 helpful votes

I have run into this problem with my Sharp Aquos as well. This is not necessarily a code problem but an interference problem.

If you take your hand or a thick book and sort of make a hood over the area of the sensor on the cable box and place the remote right up close to the sensor this will help let you know if the remote and the box are working with the code. Also might try turning off the TV or unplug the TV to test and make sure the remote will turn on the box.

Next thing after you determine this is how to block the interference and be able to use your remote. What we did is placed the Wii on top of the box over the area of the sensor and this seems to have done pretty good.

Good Luck ....

One For All... | 7,110 views | 1 helpful votes

Yes, you can I just did it. I was reading everyone logs this weekeng and off to walmart i WENT. Got a 5 dollar remote. rca model rcr312w.
Contacted rca and it was simple as pointing at the dtv , holding down that button and entering in the code for Magnavox and It was on from there. We are happy with RCA.

One For All... | 2,025 views | 2 helpful votes

• The speaker wires are frayed or sticking out
of the jack, and are touching the back of the
receiver or another set of wires.


• Reinsert the speaker wires, making sure there are no
stray strands of wire and that they are inserted fully.

thank you

One For All... | 174 views | 0 helpful votes

Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks

One For All... | 17,795 views | 2 helpful votes

One For All Remote Emerson TV Codes: 0236, 0463, 0019, 0154,0177, 0178, 0179, 0180,0181, 0182, 0183, 0185,0270, 0280, 0282, 0158,0038, 0039

One For All Remote Symphonic DVD Code: 0675

One For All... | 22 views | 0 helpful votes

Go to the One For All website

One For All... | 23 views | 0 helpful votes

The user manual for your One For All remote URC_1050 can be found on the link below.

One For All... | 18 views | 0 helpful votes

Codes are in your URC. Use code search to find something that works. If a search through all codes in the URC fails, try a different one.

One For All... | 20 views | 0 helpful votes

Use code search on your URC to find something that works. If a search through all codes contained in the URC fails, try a different one.

One For All... | 18 views | 1 helpful votes

Use code search on your URC to find something that works. If a search through all codes stored in the URC fails, try a different one.

One For All... | 50 views | 0 helpful votes

Hi some remotes will only operate a few controls the only way is to purchase a Logitech remote the cost is aprox $50 to $74 dollars ...cheers
available on E/BAY...


One For All... | 45 views | 0 helpful votes

If you wish to buy its original remote control, contact the authorised service centre, or authorised dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
{View the site in web view or by a desktop to see the search box. Mobile view has no search box.}

One For All... | 25 views | 0 helpful votes

I have had this happen on universal air conditioner remotes as well. Try looking on the website for Thorn remotes and universal remotes that will work on a Thorn. Thorn used to be AWA. You could try that as well.

One For All... | 31 views | 1 helpful votes

Not finding what you are looking for?
One For All URC-9800 LCD Remote Control Logo

31 questions posted

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76186 Answers

Cindy Wells

Level 3 Expert

6049 Answers

Joe Negus
Joe Negus

Level 2 Expert

652 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

One For All Televison & Video

  • One For All Televison & Video

Most Popular Question

codefor apex digital tuner box trying

  • Televison & Video